33' Powerplay Center Console

[northernoffshore]

the 28' is a powerplay mold?

[Steve 1]

the 28' is a powerplay mold?

No the 28's came from the original Cobra mold blocked at 28 feet, I think there was a new 28 hull in that mold when it was sold.

[Powerplay25]

No the 28's came from the original Cobra mold blocked at 28 feet, I think there was a new 28 hull in that mold when it was sold.

Isn't the 28' a shortened version of the 33' hull?

[Steve 1]

Isn't the 28' a shortened version of the 33' hull?

Exactly,Yes from the Original 32 Cobra hull mold.

[cowisl]

Here is a profile pic of the boat

[Steve 1]

Here is a profile pic of the boat

The Deck Tooling I remember well!

[cowisl]

The Deck Tooling I remember well!

Do you have any pictures?

[Steve 1]

Do you have any pictures?

I had a thread going once upon a time on the other site called "Dans picture stash" or something like that and was posting until it got hit by the Azzhats and I stopped.

Chris Yes every bit of that operation very well documented by photos, Danny was very careful about photographing everything built there ,1000's upon 1000's of very cool photos.

[Premier Perf]

I love the way the name PowerPlay came about........Dan was the chitzzz

[cowisl]

I love the way the name PowerPlay came about........Dan was the chitzzz

Do tell

[northernoffshore]

the 28' is a powerplay mold?

the stakes stop 2' from the nose?

[Steve 1]

the stakes stop 2' from the nose?

The 28 PP never came as an open fisherman! and there were only 12 of them built.

[Allstar Marine]

northernoffshore,
Sorry didn't catch onto the question until you posted the photo of the 28' Latitude. The 28' Latitude does not have any affiliation to the former 28' Powerplay. I believe the 25' and 28' Powerplay molds were purchased by someone else during the sale.

[Steve 1]

There was no 28' PP mold that was a done with a dam insert in the PP Cobra Mold.

[rchevelle71]

There was no 28' PP mold that was a done with a dam insert in the PP Cobra Mold.

Steve,

I had to laugh when reading this, not sure if you meant Dam, as in bocked off, or DAMN!!!! as in you have already said this 6 times

[Bill N]

The 28 PP never came as an open fisherman! and there were only 12 of them built.

I'm glad I have one of the 12 do you have pics of my 28 w the twin 350 mag efi's?

[Steve 1]

Steve,

I had to laugh when reading this, not sure if you meant Dam, as in bocked off, or DAMN!!!! as in you have already said this 6 times

No, there was an removable insert made for building his 28; The plug was finished to Danny's standard and inspected by him, this was placed in the mold with the finished side facing the transom,Then it and the remaining bottom along with the transom and cutting flange of the mold were Gelcoated with tooling gelcoat and laminated like to a mold thickness.

[Steve 1]

I'm glad I have one of the 12 do you have pics of my 28 w the twin 350 mag efi's?

I know who does and will try to get PP Photos posted in a thread of it's own.

[Premier Perf]

Do tell

I'll let Steve1 say it

[Bill N]

[QUOTE=Steve 1;451390]I know who does and will try to get PP Photos posted in a thread of it's own.[/QUOT


Thank You