I have some inventory propellers, that I am going to sell. They are all 5B Bravo Drive CNC Machined Propellers. In the spirit of the swap shop and the holidays I am selling them at $500.00 each. Email me if you interested and also include the size you are looking for.
Happy Holidays!
Julie
Throttle Up Propellers
SAI
727-531-2255
Thread: Throttle Up CNC Propellers
Results 1 to 20 of 93
-
12-16-2009 09:58 PM
Last edited by ThrottleUp Props; 12-16-2009 at 10:53 PM. Reason: Needed Clarify drive type
When you feel the need for speed...Throttle Up!
GO FAST or GO HOME!
-
12-16-2009 10:24 PM
can we get the gold ones for that price?
-
12-16-2009 10:53 PM
Oh, the private collection!!!! Safe and Sound of course!
JulieWhen you feel the need for speed...Throttle Up!
GO FAST or GO HOME!
-
- Join Date
- Nov 2008
- Posts
- 285
12-16-2009 11:11 PMwhat do they look like?
are they similar to the maximus?
I would be interested in a pair of L & R 28 pitch.
-
12-16-2009 11:15 PM
They are semi-cleavers. The Maximus is a High Rake Round Ear prop...the only thing similar is the Hydro P5-X.
JulieWhen you feel the need for speed...Throttle Up!
GO FAST or GO HOME!
-
-
12-17-2009 08:51 AM
Correct... I was stating the Maximus IS similar to the P5-X.
The P-5 is an out of the box semi-cleaver, non-CNC propeller. Sorry if that was confussing.
JulieWhen you feel the need for speed...Throttle Up!
GO FAST or GO HOME!
-
12-17-2009 10:07 AM
Do you have them in smaller sizes, like 24 or 25 pitch? I'm running 26 bravo 1's now and I imagine these would need to be smaller in pitch? Are the CNC'ed props basically labbed out of the box because of the precision of CNC?
-
12-17-2009 11:09 AM
I am sorry the smallest pitch made is a 28P in Stern Drive props. We do manuacture our outboard overhub props as small as 25P. Our SM props as small as 28-29P in 5B and 6B configurations.
If you are running high rake props there are no CNC versions available to date.
You are also correct in that CNC propellers are machine finished props, tight tolerances vs lab finished props from stock castings.
JulieWhen you feel the need for speed...Throttle Up!
GO FAST or GO HOME!
-
12-17-2009 11:11 AM
I also have some SM props:
5B Speed Master Props:
16.25 x 36P 5B 18 deg 650 HP RH & LH
16.25 x 40P 5B 16 deg 650 HP RH & LH
16.25 x 39P 5B 18 deg 650 HP RH & LH
16.50 x 35P 5B 18 deg 850 HP RH & LH
I will let these go, at a significantly reduced cost as well!
JulieWhen you feel the need for speed...Throttle Up!
GO FAST or GO HOME!
-
-
12-17-2009 11:30 AM
What engine package?
If you running the 26P Bravo I props (which are really 25P) at the appropriate RPM then no the 28P props would run about 750 RPM less, s they would be 3 inches taller in pitch and the additional blade. I am afraid they would be to tall for you.
JulieWhen you feel the need for speed...Throttle Up!
GO FAST or GO HOME!
-
12-17-2009 02:39 PM
I am running 32 maximus @ 3650 RPM and want to get to 3800 whit dieselpower (320 hp each )also have a set 34 bravo's but no test data yet because of the winter .
What do you think/advise
thx
-
12-17-2009 06:00 PM
Bor... tell me a little about the hull please. Also can you tell the diameter of the 32P Maximus props?
JulieWhen you feel the need for speed...Throttle Up!
GO FAST or GO HOME!
-
- Join Date
- Oct 2008
- Location
- Socialist Republic of Washington State
- Posts
- 1,027
12-17-2009 06:16 PMPlease excuse me if I missed it but did you list the pitch of the 5B Bravo props in Post # 1?
.32' Fever (Off to Syracuse) and 36"Gladiator; FORD powered
Cause somebody has to!
-
12-17-2009 06:30 PM
Yes sir....I can do that!
5B RH & LH : 15.25 x 27P, 28P, 30P, 31P, 32P and 33P
5B RH & LH : 15.0 x 30P
5B RH & LH : 15.50 x 32P
5B RH 15.25 x 29P
5B RH 15.50 x 33P
5B RH 15.25 x 30P
Thanks for asking!
JulieWhen you feel the need for speed...Throttle Up!
GO FAST or GO HOME!
-
- Join Date
- Oct 2008
- Location
- Socialist Republic of Washington State
- Posts
- 1,027
12-17-2009 06:47 PMDid you tell me to subtract 2" of pitch when going from 4B to 5B?
15.25" diameter will fit an XR -2" sportmaster correct?
.32' Fever (Off to Syracuse) and 36"Gladiator; FORD powered
Cause somebody has to!
-
12-17-2009 07:22 PM
You're an individual, private seller, right Julie? I was doing a little moderating in here (kind of lazy really) and wondered.
Thanks.Warning: This post may contain language unsuitable for minors or math not suitable for liberal-arts majors.
-
12-17-2009 07:28 PM
Ok, so I am done wondering and since I have such little authority... (this is it.... swap) I have decided by proclimation that since I just called you "Julie" you are obviously an individual private seller.
So Merry Christmas and make sure to advertise on SeriousOffshore.com when you plan your 2010 marketing campaign.Warning: This post may contain language unsuitable for minors or math not suitable for liberal-arts majors.
-
12-17-2009 07:39 PM
Yes Sir, I THANK YOU!!!!! Thats why the Bravo Props are $500.00, to comply with the Swap rules!
They are my private collection, which is why I can sell them for $500.00 each!
JulieWhen you feel the need for speed...Throttle Up!
GO FAST or GO HOME!