Throttle Up CNC Propellers

[ThrottleUp Props]

Sorry, no Bravo I props. Try Cobra Power, in Miami.... he may have some.

Julie

[wildthing]

Julie,

What is let in the 5 blades.

[ThrottleUp Props]

I am assuming you are asking about Stern Drive props? I will check and please correct me if I am wrong on drive type.

Julie

[wildthing]

You are correct.

[ThrottleUp Props]

Thanks. What diameter and pitch are you looking for?

Julie

[wildthing]

I will have to check, this is for a friend. He did say 27 but not sure on Dia. It is for a 1989 Cigarette Bullet w/Twin Mecury 575sci with Bravo XR drives. The boat came with29 3 blades spinning 4500 at 72 mph.

[ThrottleUp Props]

The smallest we make in a 5B or 6B is a 28P. I am not sure semi-cleavers are right for him though.

Julie

[wildthing]

Thanks Julie, He talked to Hydromotive and they said a 5 blade 28. Not of which one and the spec's.

[ThrottleUp Props]

I will have to check, this is for a friend. He did say 27 but not sure on Dia. It is for a 1989 Cigarette Bullet w/Twin Mecury 575sci with Bravo XR drives. The boat came with29 3 blades spinning 4500 at 72 mph.

Lets start with his current equipment and go from there.

Julie

[tcuda499]

julie,
1999 38 scarab avs. 500efis 550 hp running b1 30pitch to 5100rpm at 80mph. X dimension is really high and really slow getting out on plane. would your semi cleavers props work for me? thanks

[ThrottleUp Props]

tcuda499,

Your hull really appreciates high rake props, like the Bravo 1 or the Hydromotive P5-X. The semi-cleavers cleavers make it a real bear to plane. I would try to find some P5-X props in all honesty.

Julie

[tcuda499]

thanks Julie

[ThrottleUp Props]

You are more than welcome!!!!!!

Julie