Lookin for a pair of oval port heads like for a 330 Merc.
Thread: bare oval port heads
Results 1 to 4 of 4
-
bare oval port heads
Founding Member / Competitor
- Join Date
- Oct 2008
- Location
- on the moon . . .
- Posts
- 1,526
12-12-2009 04:19 PMThrottles- Cleveland Construction/Traffic Light Racing 377 Talon cat
-
Charter Member
- Join Date
- Oct 2008
- Location
- Ohio
- Posts
- 293
12-12-2009 06:03 PMPeanut ports? I have 4 ready to go. Call me, four four zero, two five 8. 8 two six eight. tom
-
Competitor
- Join Date
- Dec 2008
- Location
- Turku, Finland
- Posts
- 1,721
12-12-2009 06:15 PMI got some..you could find some from a pull yourself junkyard too but while your at it get 049 or 781 big oval ports from 73-74 fullsize Chevies pocket port them and slip some 088 head valves and you got 50ft.lbs of torque more thru the whole lower rev range plus they can handle a 496 turned up to 6500 rpm at 650+ hp with ease and be head to head against 088īs from 4000rpm up being superior lower.
Justa budget tip from here...
And yes I got a pair of those good ones and peanuts from cars that used antifreeze.Offshore Racing wasnīt designed to be a spectator sport, it's for people or companies with's lots of money to push the envelope of endurance technology and hopefully put a trophy on a mantle. It's man vs the elements, not like boats with like engines running in circles.
-
Registered
- Join Date
- Oct 2009
- Location
- Millstadt IL
- Posts
- 367
12-12-2009 10:57 PMI have a set of GenV heads. They have a port and pollish job. Fresh valve job, casting flash removed, chambers are pollished. I'll trade them for some 7208 glass.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts