On an 06 25 Outlaw where do you run the ground wire? also what are you useing to power the unit? Thanks in advance
Thread: Wire a GPS unit?
Results 1 to 3 of 3
-
- Join Date
- Sep 2009
- Posts
- 60
10-08-2009 07:13 PM
-
10-08-2009 09:29 PM
Look for a ground block behind the dash. A lot of times manufacturers will run a positive cable and a negative cable all the way to the dash area to tie into. Sometimes you wont find a positive block. If not you can either wire it hot to one of the switches, or if you have a unused switch or location for a switch tie it into that.
Don't tie it into an existing switch on the switched side. A Gps probably doesn't draw that much but you could over load the switch.2005 Formula 330ss
-
- Join Date
- Nov 2008
- Location
- Bradenton Fl.
- Posts
- 98
10-08-2009 10:26 PMrun both direct to batteries with a fuse on pos. right at batt. You will never have a problem with interferance from other electical units that way.