Results 1 to 3 of 3
  1. Collapse Details
    Wire a GPS unit?
    #1
    dennis1009
    dennis1009 is offline
    Registered
    Join Date
    Sep 2009
    Posts
    60
    10-08-2009 07:13 PM
    On an 06 25 Outlaw where do you run the ground wire? also what are you useing to power the unit? Thanks in advance
    Reply With Quote
     
  2. Collapse Details
     
    #2
    macjazzy
    macjazzy is offline
    Charter Member macjazzy's Avatar
    Join Date
    Oct 2008
    Location
    Annapolis, Md
    Posts
    100
    10-08-2009 09:29 PM
    Look for a ground block behind the dash. A lot of times manufacturers will run a positive cable and a negative cable all the way to the dash area to tie into. Sometimes you wont find a positive block. If not you can either wire it hot to one of the switches, or if you have a unused switch or location for a switch tie it into that.

    Don't tie it into an existing switch on the switched side. A Gps probably doesn't draw that much but you could over load the switch.
    2005 Formula 330ss
    Reply With Quote
     
  3. Collapse Details
     
    #3
    TMS1155
    TMS1155 is offline
    Registered
    Join Date
    Nov 2008
    Location
    Bradenton Fl.
    Posts
    98
    10-08-2009 10:26 PM
    run both direct to batteries with a fuse on pos. right at batt. You will never have a problem with interferance from other electical units that way.
    Reply With Quote
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules