Results 1 to 7 of 7
  1. Collapse Details
    97 Baja Hammer 454 or 454 Mag?
    #1
    Registered
    Join Date
    Sep 2009
    Location
    Belleville, Ontario
    Posts
    22
    Just bought the boat and he told me it had the mag in it but I have my doubts. The top cowl is gone on the carb and replaced. The vin on the block is 10237797. Anyone know what this is? Also what rpm does the 454 run and the mag run?
    Reply With Quote
     

  2. Collapse Details
     
    #2
    454, 330 hp at 4600rpm. 454 mag, 365hp at 4800 to 5000 rpm.

    Does the motor have a GM Quadra jet carb or a Carter carb on it?
    Reply With Quote
     

  3. Collapse Details
     
    #3
    Registered J.T.'s Avatar
    Join Date
    Nov 2008
    Location
    Ankeny, Iowa
    Posts
    142
    The 7.4's have a cast iron low rise intake manifold

    The mags have a high rise aluminum intake manifold
    Reply With Quote
     

  4. Collapse Details
     
    #4
    Registered
    Join Date
    Sep 2009
    Location
    Belleville, Ontario
    Posts
    22
    not sure what the carb is. Will check again
    Attached Thumbnails Attached Thumbnails baja engine.jpg  
    Reply With Quote
     

  5. Collapse Details
     
    #5
    Registered J.T.'s Avatar
    Join Date
    Nov 2008
    Location
    Ankeny, Iowa
    Posts
    142
    shure looks like a 7.4 to me.
    Reply With Quote
     

  6. Collapse Details
     
    #6
    Founding Member / Competitor MOBILEMERCMAN's Avatar
    Join Date
    Oct 2008
    Location
    Lake Travis Texas
    Posts
    6,818
    Looks like a weber. The idle mix screws shining in the pic. Looks like a magnum. Test the intake with a magnet.
    Reply With Quote
     

  7. Collapse Details
     
    #7
    Registered
    Join Date
    Sep 2009
    Location
    Belleville, Ontario
    Posts
    22
    they are the shiny screws in the front. Will slap a magnet on the intake tonight.
    So with the 23 mirage plus it turns 4600 rpm. If in fact it is the magnum it should run 4800 rpm I believe. I have a 21 mirage, 24 4 blade which I can try. I think the 21 may be too small and unsure how going from a 3 blade to 4 blade affects rpm.
    Reply With Quote
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •