glass dave

[Offshore Ginger]

Dawg what's up, from OFFSHORE GINGER

[glassdave]

ut-ohh . . . theres trouble

[Offshore Ginger]

ut-ohh . . . theres trouble

Thanks Dave .

[runninhotracing]

Guess they'll let anybody in this place


Hey guys IMRON 555U prep for in the bilge for the SKATER while the motors are out , sand with 180 and clean with solvent? thinner?rubbin alcohol ??
Thnx drinks on the house


ROCK ON !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Offshore Ginger]

Bill #180or 220 will be fine , vacuum and wipe with Acetone . Bill i sometimes just use a plain old tack cloth .

[Chris]

Dump about 15% MEK into the acetone. Helps with adhesion.

[runninhotracing]

Dump about 15% MEK into the acetone. Helps with adhesion.

And wipe it totally dry or it will dry sticky ??? thnx Chris AKA BIG Daddy



ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[phragle]

just be carefull with the MEK, it's nasty stuff.

[Offshore Ginger]

And wipe it totally dry or it will dry sticky ??? thnx Chris AKA BIG Daddy



ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Bill there should be no need for MEK as long as it is sanded properly and how's it going big daddy ?

[Chris]

MEK will just ever so slightly soften up whatever's under there. It won't be sticky, but it will help chemical adhesion. I can't tell you 100% that it absolutely improves things, but I've been doing it for 30+ years and I've yet to have adhesion problems. I learned it from an old-timer.

[Chris]

just be carefull with the MEK, it's nasty stuff.

It all is. MEK, acetone, etc. The worst is the cyanoacrylate in ALL paint accellerants. No filter respirator will remove it.

[Offshore Ginger]

Bill , i will e mail you and i talked with Steve today . Bill if your bilge was repainted at Skater they would never use MEK in the Acetone and considering i was employed with them over 12 years and have been working on Skater,s over 18 years and have over 34 years experience doing glass work , i guess i do not know $hit..................... But then again i was always told that glass guys are flakes and each and everyone thinks they are the best .....ha ha ha ha

[Offshore Ginger]

Dam Dave were have you been , i will buzzzzzzzzzzzzzz you tommorrow . G G

[runninhotracing]

just be carefull with the MEK, it's nasty stuff.

I might need 15% for myself if it can compete with Vicodin


ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[runninhotracing]

MEK will just ever so slightly soften up whatever's under there. It won't be sticky, but it will help chemical adhesion. I can't tell you 100% that it absolutely improves things, but I've been doing it for 30+ years and I've yet to have adhesion problems. I learned it from an old-timer.

Oh so now Glazzdave is an old timer LMAO


ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Offshore Ginger]

I might need 15% for myself if it can compete with Vicodin


ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I just took two Vicodin and drinking some Merlot , man what a $hity day And yes it is a SKATER NATION , first and always will be !!!!!!!!!!!!!!!!!!!!!NO #1

[runninhotracing]

Bill , i will e mail you and i talked with Steve today . Bill if your bilge was repainted at Skater they would never use MEK in the Acetone and considering i was employed with them over 12 years and have been working on Skater,s over 18 years and have over 34 years experience doing glass work , i guess i do not know $hit..................... But then again i was always told that glass guys are flakes and each and everyone thinks they are the best .....ha ha ha ha

Easy there Tiger A few too many paint fumes today ..nobody is saying you dont know your paint & glass ....
they got it all ready today and my lil guy is gonna spray it tomorrow morn


ROCK ON !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Offshore Ginger]

Easy there Tiger A few too many paint fumes today ..nobody is saying you dont know your paint & glass ....
they got it all ready today and my lil guy is gonna spray it tomorrow morn


ROCK ON !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Yes 555-U ALL DAY LONG , MANNNNNNNNNNNNNNNNNNNNNNNN .

[glassdave]

Oh so now Glazzdave is an old timer LMAO


ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

how old do you hafta be to be an old timer? I dont think i'm any where it yet at any rate lol

And yes the MEK is a good trick to give you a bit of a "leg up" on the adhesion, i dont think you could ever have to much of that.

Artie . . . gotta tell ya bro . . . . not real thrilled about you choice of screen names there bud. I spent a lot of time and effort perfecting the man the myth the legend that is . . . glassdave . . . . you should stick to offshore ginger.

[Offshore Ginger]

how old do you hafta be to be an old timer? I dont think i'm any where it yet at any rate lol

And yes the MEK is a good trick to give you a bit of a "leg up" on the adhesion, i dont think you could ever have to much of that.

Artie . . . gotta tell ya bro . . . . not real thrilled about you choice of screen names there bud. I spent a lot of time and effort perfecting the man the myth the legend that is . . . glassdave . . . . you should stick to offshore ginger.

Dave before i joined i came aboard as a vistor and i saw that Race dad has already thrown me under the bus , i thought i would be banned before i got started . Dave you have the power , help me change it .................................... Back to OFFSHORE GINGER ......... Artie