What do u guys think of a 33 staggered with 700+ HP and arneson drives ???
Would it kick a$$ or no ?LOL
![]()
Thread: INFO for all to chime in
Results 1 to 20 of 28
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
05-08-2010 04:44 PM
-
05-08-2010 04:48 PM
I think a 33 is too short to stagger.. I do like the side by side with Arneson's tight. That would be a real nice set up.
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
-
05-08-2010 05:13 PM
I don't doubt they ran well. I prefer not to need boxes and it is my opinion not to stagger anything less than 38.
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
-
05-08-2010 06:46 PM
I think it would work (and be badazz). Props are around same distance from transom as SSM #3/4 on boxes, and I would think ASD is lighter as well. I've honestly never heard of an app. where Arnesons don't work, and usually work noticeably better.
-
05-08-2010 08:43 PM
I guess it is a toss up staggered with the ASD6 or side by side with the 8's turned in. I would go with the 8's turned in.
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
-
05-08-2010 09:50 PM
he means asd8's angled in so the props are close to each other, while the engines are side by side. Not talking prop rotation.
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
-
05-08-2010 10:27 PM
Accuse my ignorance with this question. What advantage do arneson drives give?
Taking Over the World One Thread at a Time
The Penguin Cometh
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
05-08-2010 10:49 PMHold up the power , trouble free,,,set back with out the weight , tranny in the box, running SSM props and act like SSM , or better ( surface drives )
So in my opinion ,,,i will buy a staggered PP and stick some arneson on it,,then i can let u all know if it made a differents and i bet it will to the better....handling , eccelaration and top speed !!!!!!!
Gonna race it of coarse..maybe build a new one. don't know yet
-
05-08-2010 10:51 PM
surface drive, no lower dragging in water, no 90 degree gears eating horsepower (more power to the water), better props over bravos, lighter?, more reliable less moving parts.
-
05-08-2010 10:52 PM
typing at same time Daredevil
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,351
- Blog Entries
- 44
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
05-10-2010 08:53 PMNobody else is going to chime in here ????????
Ok, what would be if they would re-open PP and start building boats again, how many u think would like this ???????
-
05-10-2010 10:34 PM
I think it would be a sweet setup! I run hard through some rough water often and really would like to get the feel of a staggered 33. Seems like it's just what it needs...
-
- Join Date
- Jan 2009
- Posts
- 47
05-11-2010 12:05 AMif you could find some arnesons i have the boat to use as a test boat!!!