http://predatorpowerboats.com
What's the story? Apparently the 30 was a Doug Wright hull? I like that they offer different stages of build and the pricing seems reasonable.
Thread: Predator Powerboats....
Results 1 to 12 of 12
-
04-05-2014 01:09 PM
-
04-05-2014 02:36 PM
Doug Wright built the molds, then sold them to AMT, AMT then sold the molds to Predator Powerboats.
Run until it sounds expensive
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,552
- Blog Entries
- 44
04-06-2014 12:27 PMHave you heard any followup?
Getting bad advice is unfortunate, taking bad advice is a Serious matter!!
-
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,552
- Blog Entries
- 44
08-22-2016 01:45 PMDo you have any test information yet?
Getting bad advice is unfortunate, taking bad advice is a Serious matter!!
-
08-22-2016 04:20 PM
No that s gonna be probably next spring maybe just before winter , now rigging the boat step by step , we build custom aluminum offshore mounts on rails so we can play whit engines moving forward and back to chance cg point . Now gonna do the fuel system low pressure pump, catch tank filters and also Need to build second engine .
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,552
- Blog Entries
- 44
08-24-2016 08:31 AMThat is the boat that was at the boat show in Miami next to Skater, correct?
Did you sell it, and what power is going in it?Getting bad advice is unfortunate, taking bad advice is a Serious matter!!
-
08-26-2016 03:28 PM
Yes thats right , no i bought it and gonna put in 2 aluminium ls Engines whit 500 hp in it On drive lines and bravo Xr iTS sportmasters On the transom .
When ready I will put it on the market here in Europe and use as a demo boat and see if I can sell some as there is almost nothing for sale here in the cat market beside ones whit wind propulsion
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,552
- Blog Entries
- 44
08-27-2016 08:03 AMThat is really cool. Make sure you keep us informed.
Getting bad advice is unfortunate, taking bad advice is a Serious matter!!
-
-
10-16-2016 06:47 AM
A bit later then planned but still worth it I think , I found a set of my always wanted Arneson Asd 7 M drives !
After a week of thinking if I would go that route because we have to fill the notch change the engine mounts and fill the holes that I made for the bravo s again we will throw away a lot of work !
But as it was first my idea to build my dream boat whit those drives and ls engines to get a bulletproof lightweight efficiency boat I pulled the trigger !
So we are back to start again !
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,552
- Blog Entries
- 44
10-16-2016 11:54 PMThat's a big change. Good luck and keep us informed......
Getting bad advice is unfortunate, taking bad advice is a Serious matter!!