Search:

Old post I know, but..FYI

One of my drives was doing the exact same thing. Cable adjustments were fine. Was early in that season, and started to get worse. Pulled the drive apart and replaced...

Anytime, thanks for the pictures.

LE

I know this tread has been cold for over a year, but I could'nt resist reviving it after this last weekend.

First off I am proud to say I had two great summers ('09/'10) with out any issues with...

still have the pair that need cosmetic repair. $125





LE

still got it.




LE

bump

The good pair are sold.

$150 for the other pair.

sold..



LE

With Procharged 509's I have self educated myself on the Bravo drive. Everybody makes them out to be so difficult to work on, and Teague and the others use special components. They are a very simple...

$400 for both pairs.

LE

I have 2 pairs of Corsa 4" transom mounting mufflers. Corsa #12650-1, 6.5'' bodies, rated to 700hp, new $700 a pair.

Took them off my boat, 1 pair have some cosmetic cracking around the tailpipe...

I have 1 XR u-joint input shaft for sale. GKN style, 1.217" bearing cup diameter. Good condition.

$125

Scott 216-214-2462 sklap@cox.net

LE

I have a pair of clean 30p Bravo one props that were labbed up in pitch. They are very clean, came with my boat, and I ran them when I had 1.36 drives. They are stamped 32 next to the factory merc...

You can pull the back cap and see the teeth faces of the pinion and drive gears and get an idea of how there wearing. You will probabally need to pull the pinion and drive gears out to inspect the...

I cant remember the color, but will look the next time I'm in there.

LE

XR's gear sets come with 2 drive gears and 1 pinion and list for around $1600. I think you can also buy just the pinion, but the drive gears are not available individually.

LE

I just upgraded to XR's last season, I picked up a set of used Merc reman units(not swept back), probabally 2005 vintage,with around 10hrs of use from the previous owner who bought them from Merc....

I hear what your saying and agree with you mostly. The problem I'm *****ing about is that the early XR gears appeared to be made right and didnt break teeth off, and then the gear was changed, prices...

New case for this year then?

LE

You shouldnt be going thru drives then. Your boat is not that heavy and your HP s in the range of those drives. That just sucks.. What has IMCO said?

LE

I'm a little confused?? You started the thread saying pin bearing, then started calling the part a pin gear?

You are talking about the upper cap needle bearing that supports the upper part of...

Early IMCO SC's? What kind of top cap? Left drive uses the upper gear as stated, early IMCO's modified the caps for use with 7/16 studs over the 3/8 bolts that normally holds them down but they did...

If you need a piston let me know, I have a view spares that I can sell.

LE

When I replaced mine I used a threaded rod with a big washer and nut on the bearing side, and a piece of flat stock on the bellhousing. I pulled out the bearing instead if hammering it out. Because...

Replaced all of mine in 2006 when I did my dash. I bought mine right from Livorsi, dont remember the price, less then $10 a cover though.

Page 81 of #16 catalog: MC + color. I'm sure there the...