I have a 96 25 Thunder . Can anyone tell me how to remove the rear seat back ? Thanks alot for any info!!
Printable View
I have a 96 25 Thunder . Can anyone tell me how to remove the rear seat back ? Thanks alot for any info!!
I think mine was modified by a previous owner, I just pull the bottom of the back out and lift up, quick release:)
Denny look in the engine compartment for bolts. should be bolted on.
Cool thanks! Ill try lifting it up from the bottom . Bob i dont see any bolts from the engine comp.
If I remember correctly, (coming from the guy with dain bramage), there are two studs that come from the top of the seat-back, down into the top of the bulkhead. Hard to explain, but you will need to crawl into the area of the back seat base, then reach up between the seat back and the engine compartment bulkhead with a looooong extension to get to the locking nyloc nuts.
simple. ;)
Tried lifting the bottom of the seat back but it wouldnt budge . Boat is in a storage shed so ill try to find the bolts the next trip .Thanks!!
Denny its got to have some bolts somewhere.