PDA

View Full Version : Water Temp Issues?



540/27fastech
08-29-2009, 08:50 AM
Hi, Just got a problem I am having I got a 502mpi built to a 540 when I am idling my water temp gauge is showing 135* when i plane out and start running the temp starts to climb to 175*/180*. It has a 140* t-stat in it. I have had the sender checked along with the gauge both are fine. I have checked all hoses and coolers for blockage nothing found. Its got me stumped.. Also the port riser runs cooler that the starboard side? Also I have put a new raw water impeller in it. If anyone has ideas let me know. thanks everyone

jwurl
08-29-2009, 09:06 AM
I have your same boat. My does the same thing. My one riser is much hotter than the other. I have also removed all my hoses ,flushed everything, checked for blockages,replaced thermostat and rebuilt my raw water pump. My boat gets as hot as 180 on the gauge when really running it hard. I have talked to many people and we all seem to have the same problem. My guess...That is just how it is.... The engine oil cooler catches any debris that may have been a blockage.. Jeff Wurl

Ratickle
08-29-2009, 09:46 AM
180 wouldn't bother me in the slightest. What is your oil temp running at?

old377guy
08-29-2009, 05:28 PM
like rat said..

Griff
08-29-2009, 06:47 PM
A 502mpi should have a 160* Tstat in it anyway. You could be sucking a little air mixed in with the water at speed. My stock 502mpi runs about 170* on the guage most of the time.

Ratickle
08-29-2009, 06:54 PM
Thinking about this. Would it need bigger injectors for the larger cubes/more horsepower? Running slightly lean?

MERPerformance
08-29-2009, 07:20 PM
Hi, Just got a problem I am having I got a 502mpi built to a 540 when I am idling my water temp gauge is showing 135* when i plane out and start running the temp starts to climb to 175*/180*. It has a 140* t-stat in it. I have had the sender checked along with the gauge both are fine. I have checked all hoses and coolers for blockage nothing found. Its got me stumped.. Also the port riser runs cooler that the starboard side? Also I have put a new raw water impeller in it. If anyone has ideas let me know. thanks everyone
http://www.seriousoffshore.com/forums/showthread.php?t=8435
Start looking at this thread, 180 isn't going to be normal with a140 degree stat.

bajabob 718
09-02-2009, 07:03 PM
i would pull some plugs and take a look at them ??? to lean the temp will go up and to much timing ..