View Full Version : Hinge Pin Help....
Seafordguy
04-26-2009, 04:18 PM
Before I f it up, how do I get the "cover" off the hinge pins?
Stainless cover with 2 6 sided screws in the side. Obviously I Have removed the screws but It doesn't want to come off?
Before I f it up, how do I get the "cover" off the hinge pins?
Stainless cover with 2 6 sided screws in the side. Obviously I Have removed the screws but It doesn't want to come off?
pic is worth a thousand words.
What ya got?
Seafordguy
04-26-2009, 04:30 PM
I have been looking for the camera for 30 minutes.
Bravos, the trim sensor is NOT mounted on the ring, it is attached to the trim rams
OK, I take it we're still working on the trim down problem.
This is the trim sensor that I was refering to in the other thread.
This sets the trim limits up/down.
I've never messed with it on the Bravo, haven't needed to, but it was a similar settup on the TRS I used to have.
Again, I am far from an expert on this, but trying to help out with what little I know.
txriverrat2001
04-26-2009, 05:02 PM
If your talking about what I think you are - that stainless cover is a high performance hinge pin ... i.e. there is not a pin underneath it......
number 10 in this pic from BAM
http://www.mercruiserparts.com/Show_Pictures3.asp?dnbr=891749001&ivar=images/COMMON/21194.png&inbr=11406&bnbr=90&bdesc=Gimbal+Ring+and+Steering+Lever
Seafordguy
04-26-2009, 05:46 PM
OK, I take it we're still working on the trim down problem.
This is the trim sensor that I was refering to in the other thread.
This sets the trim limits up/down.
I've never messed with it on the Bravo, haven't needed to, but it was a similar settup on the TRS I used to have.
Again, I am far from an expert on this, but trying to help out with what little I know.
No, Bouy unfortunately I moved on from the trim problem and figured I'd work on that once I got the engines back in and the drives back on and had that extra weight working for me.
If your talking about what I think you are - that stainless cover is a high performance hinge pin ... i.e. there is not a pin underneath it......
number 10 in this pic from BAM
http://www.mercruiserparts.com/Show_Pictures3.asp?dnbr=891749001&ivar=images/COMMON/21194.png&inbr=11406&bnbr=90&bdesc=Gimbal+Ring+and+Steering+Lever
I don't have the trim indicators bolted to the hinge pin like you have Bouy, but I think we are getting closer with that Pic from BAM.
It has 2 small 6 hexed bolts in it and the center is threaded.....
MOBILEMERCMAN
04-26-2009, 06:05 PM
It has 2 small 6 hexed bolts in it and the center is threaded.....
The thread is to install an adapter tool and to use a slide hammer
Seafordguy
04-26-2009, 06:13 PM
The thread is to install an adapter tool and to use a slide hammer
Damn it.
Thanks man.....
MOBILEMERCMAN
04-26-2009, 07:05 PM
The tool part number is 91-63616. It will thread on to a slide hammer
Seafordguy
04-27-2009, 08:17 AM
The tool part number is 91-63616. It will thread on to a slide hammer
Thanks MERCMAN - I appreciate the help. I'm sure I'll be back for more in the upcoming days.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.