PDA

View Full Version : Length of Bravo Drive



MattBMiller
04-03-2009, 11:11 AM
Anybody know distance from Crank C/L to the Propshaft C/L on a Bravo off the top of their heads??

Mr Gadgets
04-05-2009, 08:38 PM
I just ran out to the shop.. never measured it.. But it looks to be 21.5", best I can tell with the tape measure.

Hope that helps.
Dick

MattBMiller
04-07-2009, 01:30 PM
Thanks!

Blue Thunder
04-20-2009, 07:52 PM
I made some x dimesnsion adjustments over the winter and did a lot of reading on the subject. The concensus was the crank cl to prop cl was 22.25" on a standard bravo.

Trim'd Up
04-24-2009, 07:09 PM
I measured mine not long ago and I came up with about 21.5" too. Not terribly scientific though, just a tape while it was laying on the ground.

klaw
04-26-2009, 08:07 PM
here is a drawing I found

Ratickle
04-26-2009, 08:24 PM
here is a drawing I found

Nice find. Thanks.

klaw
04-26-2009, 09:05 PM
I did a pdf to autocad conversion and got it in the right scale if anyone needs it in autocad let me know

MattBMiller
04-26-2009, 09:52 PM
Good find indeed

insanity
04-27-2009, 12:51 AM
There is a conversion chart in an install book I have. I'll scan a copy of it and post it as well. Very informative.



I did a pdf to autocad conversion and got it in the right scale if anyone needs it in autocad let me know

I would like a copy. I'll pm you my email address.

Blue Thunder
04-27-2009, 07:54 PM
Great info! 21 13/16" it looks like. Thanks klaw, that is helpful.

BT