PDA

View Full Version : Help Removing Rear Seat Back


dencam7
02-28-2009, 09:36 AM
I have a 96 25 Thunder . Can anyone tell me how to remove the rear seat back ? Thanks alot for any info!!
My Addiction
03-02-2009, 01:20 AM
I think mine was modified by a previous owner, I just pull the bottom of the back out and lift up, quick release:)
38fountainSC
03-02-2009, 11:14 AM
Denny look in the engine compartment for bolts. should be bolted on.
dencam7
03-03-2009, 05:17 PM
Cool thanks! Ill try lifting it up from the bottom . Bob i dont see any bolts from the engine comp.
Gordo
03-03-2009, 05:56 PM
If I remember correctly, (coming from the guy with dain bramage), there are two studs that come from the top of the seat-back, down into the top of the bulkhead. Hard to explain, but you will need to crawl into the area of the back seat base, then reach up between the seat back and the engine compartment bulkhead with a looooong extension to get to the locking nyloc nuts.
simple. ;)
dencam7
03-04-2009, 01:37 PM
Tried lifting the bottom of the seat back but it wouldnt budge . Boat is in a storage shed so ill try to find the bolts the next trip .Thanks!!
38fountainSC
03-04-2009, 06:39 PM
Denny its got to have some bolts somewhere.
My Addiction
03-04-2009, 07:42 PM
Denny its got to have some bolts somewhere.

No bolts, I think just two Nuts:26: