Bravo Water Supply Hose Fitting

[MattBMiller]

Does anyone know if you can buy a straight hose barb fitting for a Bravo transom assembly. The standard fitting comes off the drive at an angle to clear the back of the motor but with my extension box it is not ideal.

[txriverrat2001]

Try IMCO - They have the extension boxes on the Hemi boat a friend has and his are straight.......

[Geronimo36]

I assume you're talking about the barb on the inside thats bolted to the transom assembly?

If you're worried about the hose kinking I'd run a wirebound hose instead of regular walled hose.

[Airpacker]

I just finnished making a new billet one for my boat. Bought a piece of aluminum flat bar stock. Cut it to the approximate shape of the mounting flange, drilled the mount holes and then drilled and tapped for 1/2 NPT thread and used a screw in fitting. Total cost was about 10 bucks and an hours time.

[Scott H.]

bravo ITS

[MOBILEMERCMAN]

Welcome Scott H

I hope you enjoy the site

[fbc25el]

I have a imco ext. box on mine. I made a strate fitting for mine but mine was 1 inch.

[Bad Idea Baja]

bravo ITS

Really? Looks the same as the standard bravo one to me from the illustration on BAM's site.

[Scott H.]

Yes Really Merc P/N 22 840688 connector

[MattBMiller]

Thanks, I'll look into that