PDA

View Full Version : 33 OUTLAW A/C install pics.



ICDEDPPL
08-21-2012, 09:40 PM
I searched all over and could not find any info on this so I thought I`d post this up for future reference:

I ran the power from the circuit breakers, and the discharge on the port side in the crease under the bench seat along with the T stat wiring:

http://33outlaw.zenfolio.com/img/s1/v47/p1049068062-3.jpg


http://33outlaw.zenfolio.com/img/s1/v46/p112457565-3.jpg


http://33outlaw.zenfolio.com/img/s1/v55/p57282850-3.jpg



Same side with the supply air:


http://33outlaw.zenfolio.com/img/s1/v55/p781970504-3.jpg

http://33outlaw.zenfolio.com/img/s4/v68/p878711751-3.jpg


I drilled an access hole to see where I was drilling thru and to help feed the lines. The hole is in the solid piece of the boat not the first piece that serves as a cover so unless the cover piece is unscrewed and removed it`ll never be seen.


http://33outlaw.zenfolio.com/img/s4/v63/p639230340-3.jpg


http://33outlaw.zenfolio.com/img/s4/v69/p778949072-3.jpg


http://33outlaw.zenfolio.com/img/s1/v55/p816583658-3.jpg



4 1/2" hole in the arm rest (dead space) then I fed the line up into the corner (another hole from the top)


http://33outlaw.zenfolio.com/img/s4/v69/p949162600-3.jpg


http://33outlaw.zenfolio.com/img/s4/v62/p415054596-3.jpg

ICDEDPPL
08-21-2012, 09:40 PM
Looking back the intake might have been better from the bottom, I needed an extra long pickup when going thru the Transom but as I was a chicken **** making a hole in the bottom of the boat transom it was:


http://33outlaw.zenfolio.com/img/s1/v54/p433827531-3.jpg


Valve on the inside:


http://33outlaw.zenfolio.com/img/s4/v62/p240302573-3.jpg



Extra long pick up and my daily schedule I guess lol


http://33outlaw.zenfolio.com/img/s1/v47/p140512121-3.jpg



I had to make some platforms for the pump and strainer to sit on... must be all be under the water level


http://33outlaw.zenfolio.com/img/s4/v67/p440268-3.jpg


I ran the supply line and electric power for pump on the Starboard side thru the bathroom under the couches and to AC.


http://33outlaw.zenfolio.com/img/s4/v62/p283172326-3.jpg



Discharge under sink drain:


http://33outlaw.zenfolio.com/img/s1/v54/p161103026-3.jpg


The condensation I`m running in the drain for now till I order a CONDENSATOR which takes it out with the discharge. I found out the drains do not empty in the bilge, the water just sits under the boat.


Hope this helps someone..

OBNOXUS
08-21-2012, 11:05 PM
Looks good man !!! wanted to do that to the 36,,,,,sold it instead !!!!!! LOL

I sure will miss your " OLD " setup though !!!!!!

ICDEDPPL
08-21-2012, 11:44 PM
Thanx!

I`ll bring out R2D2 just for you :-)

teamsynergy
08-22-2012, 05:57 AM
Looks good but... is the sea strainer upside down?

Bobcat
08-22-2012, 08:48 AM
Great job, it definitely looks COOLER :cool:

CruiserJohn
08-22-2012, 09:01 AM
One more step to becoming Cruiser Dan! Love it...

MILD THUNDER
08-22-2012, 09:35 AM
Way to go Dan. When can i bring mine over? I need to send my R2D2 out to pasture.

teamsynergy
08-22-2012, 10:09 AM
I will miss the R2D2... Everytime it was on the dock... I tried to get the hologram to appear.... always in the morning hours... it seemed to work as the hatch opened and I heard a voice... "alright...who the phuck turned off my air" lol... i'll miss thsoe days. I guess now I have to unplug the boat :)

ICDEDPPL
08-22-2012, 03:19 PM
I will miss the R2D2... Everytime it was on the dock... I tried to get the hologram to appear.... always in the morning hours... it seemed to work as the hatch opened and I heard a voice... "alright...who the phuck turned off my air" lol... i'll miss thsoe days. I guess now I have to unplug the boat :)

LOL , always turning off my ac to get me up, worked everytime.

Cruiser John, I will have a BLACK THUNDER before a cruiser, CHURCH!

Joe, call AccuMax Inc. for an appointment :sifone:

offshoreexcursion
08-23-2012, 12:30 AM
awesome job, thanks for sharing!