ICDEDPPL
08-21-2012, 09:40 PM
I searched all over and could not find any info on this so I thought I`d post this up for future reference:
I ran the power from the circuit breakers, and the discharge on the port side in the crease under the bench seat along with the T stat wiring:
http://33outlaw.zenfolio.com/img/s1/v47/p1049068062-3.jpg
http://33outlaw.zenfolio.com/img/s1/v46/p112457565-3.jpg
http://33outlaw.zenfolio.com/img/s1/v55/p57282850-3.jpg
Same side with the supply air:
http://33outlaw.zenfolio.com/img/s1/v55/p781970504-3.jpg
http://33outlaw.zenfolio.com/img/s4/v68/p878711751-3.jpg
I drilled an access hole to see where I was drilling thru and to help feed the lines. The hole is in the solid piece of the boat not the first piece that serves as a cover so unless the cover piece is unscrewed and removed it`ll never be seen.
http://33outlaw.zenfolio.com/img/s4/v63/p639230340-3.jpg
http://33outlaw.zenfolio.com/img/s4/v69/p778949072-3.jpg
http://33outlaw.zenfolio.com/img/s1/v55/p816583658-3.jpg
4 1/2" hole in the arm rest (dead space) then I fed the line up into the corner (another hole from the top)
http://33outlaw.zenfolio.com/img/s4/v69/p949162600-3.jpg
http://33outlaw.zenfolio.com/img/s4/v62/p415054596-3.jpg
I ran the power from the circuit breakers, and the discharge on the port side in the crease under the bench seat along with the T stat wiring:
http://33outlaw.zenfolio.com/img/s1/v47/p1049068062-3.jpg
http://33outlaw.zenfolio.com/img/s1/v46/p112457565-3.jpg
http://33outlaw.zenfolio.com/img/s1/v55/p57282850-3.jpg
Same side with the supply air:
http://33outlaw.zenfolio.com/img/s1/v55/p781970504-3.jpg
http://33outlaw.zenfolio.com/img/s4/v68/p878711751-3.jpg
I drilled an access hole to see where I was drilling thru and to help feed the lines. The hole is in the solid piece of the boat not the first piece that serves as a cover so unless the cover piece is unscrewed and removed it`ll never be seen.
http://33outlaw.zenfolio.com/img/s4/v63/p639230340-3.jpg
http://33outlaw.zenfolio.com/img/s4/v69/p778949072-3.jpg
http://33outlaw.zenfolio.com/img/s1/v55/p816583658-3.jpg
4 1/2" hole in the arm rest (dead space) then I fed the line up into the corner (another hole from the top)
http://33outlaw.zenfolio.com/img/s4/v69/p949162600-3.jpg
http://33outlaw.zenfolio.com/img/s4/v62/p415054596-3.jpg