PDA

View Full Version : Who likes what showers?



fund razor
07-14-2012, 07:03 AM
I am finally getting around to adding showers to my bravos. Everything is working well, but I see that the paint has lost its gloss there. I have seen some steam coming off of plane, and it ain't the engines. Time for showers.

Who likes what? I kind of like the top cap kind. but I don't like drilling the cav plate so much. I like the Simrek halos, especially installation method. But I wonder if the cap gets cooled enough.

Thanks for your input. I'd like to get something ordered.

fund razor
07-14-2012, 07:17 AM
I see that Livorsi has something called a drive shower hose for latham. I guess it connects to the latham top steering plate? I have latham external. What's that all about? Does it still use a top cap cover?

Buoy
07-14-2012, 09:46 PM
Pretty sure mine is Latham.
Top cap that mounts over the existing.
My boat was orig a TRS, so it has a thru-hull water pickup for engine cooling.
When previous owner converted it to Bravo, he used the drive pickup to feed the shower. Makes sense to me. Kept the thru-hull for motor cooling. More drag, but it's not like im looking to break a speed record...
I'll try to get a few pics for you tomorrow when I'm down there.

fund razor
07-16-2012, 12:24 PM
Like this one?

Stainless Steel "Sport Tech" Outdrive Cooling Shower - CP Performance (http://www.cpperformance.com/p-11567-sport-tech-outdrive-cooling-shower.aspx)

Ratickle
07-17-2012, 11:43 AM
I've been told by more than one person the Simrek is the best for all around cooling. Does the top and sides.

fund razor
07-17-2012, 01:14 PM
I was looking at the Simrek, but wondered about my latham front covers and my steering rams.

The Simrek doesn't need a hole in the cav plate, which is nice.

fund razor
07-17-2012, 01:20 PM
The Simrek doesn't actually do the top. They say that the sides are better.
Pic from Simrek site.

fund razor
07-17-2012, 03:15 PM
I sent Simrek a pic of my stern to see what they think as far as interference with their tubes. No word yet.

Ratickle
07-18-2012, 08:31 AM
They also make one that goes over the top, besides the one that goes around.


http://youtu.be/Ske-qLlEjL8

fund razor
07-18-2012, 11:47 AM
That is the Summit series on an Alpha.
Not worth changing to Alphas just to get it over the top cap. :)

Still no email back from Simrek. It is vacation season, I know.

fund razor
07-19-2012, 08:34 PM
I have been busy as heck but wanted to update that I got a nice email from Paul at Simrek yesterday afternoon.
He's gonna look at a pic and see if the halo Max will clear my hardware.

fund razor
07-19-2012, 09:17 PM
If I recall from the Simrek email, we are looking for 5/8 between the head of the bolt that holds the steering ram and the side of the plate inside where the drive meets the plate.

fund razor
07-19-2012, 09:20 PM
That pic is with my drives aligned with my keel (straight)

Ratickle
07-20-2012, 05:47 PM
Stalk????????:toetap05:

With a name like Paul, he's gotta be a great guy.....

Ratickle
07-20-2012, 05:48 PM
So how much room is there? We need some pics with rulers in all the right places.....

halfgassed
08-06-2012, 11:53 AM
Custom CNC Machining | Wags Engineering (http://wagsengineering.com/)

I bought these, happy with them so far, they are definatley a meaty cap and a nice piece of machine work.

Donskihp
08-09-2012, 10:27 PM
I just got one from Teague, top fits on my Latham top plate for the steering. Pick up mounts on cav. plate. don't really like that, but thats what it is. Any recomendations on mounting the pick up?

Ratickle
08-10-2012, 06:52 PM
I should see Bob tomorrow. I'll ask him why he doesn't send out detailed instructions.....:sifone:

Donskihp
08-10-2012, 09:36 PM
Sounds good !

Donskihp
08-27-2012, 09:03 PM
I should see Bob tomorrow. I'll ask him why he doesn't send out detailed instructions.....:sifone:

Just got my lower back from Teague,(rebuild). I asked him to drill it for my shower I got from Him, That didn't seem to Happen, so its up to me. Any one have any info as to which side, how close to the rear and side edged?

Ratickle
08-28-2012, 05:36 PM
He must have been too busy at the Shootout.

Call John and ask him to email you a picture or intructions. (I shot him an email)

Donskihp
08-29-2012, 08:30 AM
I talked to Eric at Teague, he was able to get me the info

Ratickle
08-30-2012, 08:02 AM
Good. John said he was buried but gave it to Eric to assist. DId you get everything you needed?

Donskihp
08-30-2012, 09:57 PM
Yep

fund razor
08-25-2015, 07:02 AM
Anybody know if Simrek is still in business?