PDA

View Full Version : 22 Stingray



Stingray468
10-20-2010, 09:35 PM
I have 22' Stingray, Fresh built 468. Right now I have a 25 pitch Mirage, was wondering how this prop should act. Thanks for any help.

Slandrew
10-20-2010, 09:38 PM
Speed I whould guess 70-75 3 blade@5k rpm:rolleyes:

Stingray468
10-20-2010, 09:42 PM
I was think along the same lines. I sure hope so. I took her out last sunday for a shakedown run and hurt some bearings in the outdrive. Had fluid. Guess it was time for it to rebuilt anyway. lol

ACrooks70
10-24-2010, 10:23 PM
The mirage will make the boat feel nice and loose, but it should be the fastest overall prop for the boat as the laser 2 won't be able to hold any kind of hole shot or turns, let alone carry the bow at any altitude.

Stingray468
10-25-2010, 12:14 PM
The mirage will make the boat feel nice and loose, but it should be the fastest overall prop for the boat as the laser 2 won't be able to hold any kind of hole shot or turns, let alone carry the bow at any altitude.
Ok thanks for the info. I see you have a Stingray, have any pics?

bbladesprops
11-08-2010, 03:42 PM
M+ and Revolution 4 propellers have been the props of choice for the Stingrays we have worked on.

Speed guys like the Labbed M+'s and the over watersports etc. guys love Labbed Revolution 4's.

Brett

Stingray468
12-03-2010, 04:11 PM
Ok I took it out for a top speed run last weekend and I got 69-70mph GPS. But the prop is slipping real bad when I trim it up. I was hardly able to trim it up at all with the 25p 3 blade. Im wanting to go to a 4 blade but dont know what pitch will give me my best performance for top end. Any suggestions??? Thanks

bbladesprops
12-06-2010, 04:46 PM
What rpm did you reach at 69.5? What rpm do you desire.

We can add more bow lift to the 25M+.

Brett

Donskihp
12-06-2010, 11:08 PM
Brett, That Hydro 5 blade 27P I got from you in the spring, This fall I ran 80mph @ 5450 rpm with the cooler weather. Mid range is incredible. Don

bbladesprops
12-08-2010, 10:07 AM
Looks like 81 to me LOL.
Glad to hear it is working well.

Brett

Donskihp
12-08-2010, 08:37 PM
My Garmin GPS showed 80.0 but i'm not complaning Don

Ben
12-09-2010, 11:15 PM
I know it's off topic but Donskihp, were you running your boat on the North River a month or so back?

Donskihp
12-09-2010, 11:22 PM
Sure was! Cool some one from my neck of the woods. Whata running? Don

Ben
12-09-2010, 11:39 PM
Was doing something inside my house and I mentioned to my wife that I heard a very interesting boat on the river. Went outside and saw a red boat but couldn't tell the make due to distance. I figured that the red boat might just be heading for the boat ramp at Warehouse Road so took a ride down there just in time to see a very nice Donzi with all the right sterngear being readied to leave on its trailer!

I've currently got an old (1980) Excalibur 24. I'm waiting for the engine to be returned from Express Engines in Florida. The last job they had to do was get the Stellings repaired which should be done by this weekend. Then ship it up to Chesapeake Cove in Deltaville where the engine will be reinstalled.

(The Cigarette shaped logos were on the boat when I bought it - not my fault!)

Donskihp
12-09-2010, 11:51 PM
You should have stoped me for an introduction. Have to hook up some time, there are not ahole lot of performance boats in this area. Don

Ben
12-10-2010, 05:44 PM
Sounds good.

Donskihp
01-16-2011, 09:46 AM
Ben: Gotten the engine back yet? Don

Ben
01-19-2011, 08:23 PM
Sorry I haven't replied earlier Don. I haven't had a look at SOS in a few days.

The engine was shipped from Express Engines at the end of December. I'm not pressuring Chesapeake Cove at the moment to get the installation and testing done since the weather has been disagreeable to say the least.

Looking very much forward to getting it done soon though. Please stay in touch.

Pic of engine just prior to leaving Florida.

Slandrew
01-19-2011, 10:25 PM
Was doing something inside my house and I mentioned to my wife that I heard a very interesting boat on the river. Went outside and saw a red boat but couldn't tell the make due to distance. I figured that the red boat might just be heading for the boat ramp at Warehouse Road so took a ride down there just in time to see a very nice Donzi with all the right sterngear being readied to leave on its trailer!

I've currently got an old (1980) Excalibur 24. I'm waiting for the engine to be returned from Express Engines in Florida. The last job they had to do was get the Stellings repaired which should be done by this weekend. Then ship it up to Chesapeake Cove in Deltaville where the engine will be reinstalled.

(The Cigarette shaped logos were on the boat when I bought it - not my fault!)I like the Logos cool boat!:USA:

Donskihp
01-19-2011, 11:00 PM
Glad to hear you got it back, Don't wait too long you know hows marinas get come spring time. Don

Ben
01-21-2011, 12:44 PM
I like the Logos cool boat!:USA:

Thanks, I'll probably just keep the logos as they are.




Glad to hear you got it back, Don't wait too long you know hows marinas get come spring time. Don

Heard from Chesapeake Cove yesterday. The engine is in the boat and has been run on the hose. We will wait for a weather break for some testing.

Donskihp
01-21-2011, 11:23 PM
Sounds good