PDA

View Full Version : hight for the X/ weight



Chicken Little
04-21-2010, 07:09 PM
Hi to my Python brothers. I have a 1981 24ft Python that came originlly with a 350/ Volvo 280 drive...Im in the process of re-doing EVERYTHING with a new little motor 489ci pushing 675hp:driving: It has a beefed up brovo 1 drive with imco upper/lower... I want to know what's the X dim you guys recommend/ also do yall know how much these boats weight.....thanks in advance

Chicken

Premier Perf
04-21-2010, 08:54 PM
Learn how to use this WILLY :iamwithstupid::sifone:

Richard Crainium
04-25-2010, 10:37 PM
I have my X set at 18" you can space it down easyer than re-doing the transom again.Check your exhaust clearance to the hatch . I wighed my boat before it was rigged, but I cannot remember what it weighed.

DonMan
05-02-2010, 02:54 PM
Do all 24' have the same X , as delivered from Python ?

I have no idea what mine is.

DAREDEVIL
05-02-2010, 07:51 PM
I have my X set at 18" you can space it down easyer than re-doing the transom again.Check your exhaust clearance to the hatch . I wighed my boat before it was rigged, but I cannot remember what it weighed.

:iagree:, but tilt the engine a little forward,,so the CG stay's low !!!!!!!
18-19 is a god # i guess u need a 2" shorty to do so though .?!

liquordistributor
05-28-2010, 12:08 PM
the weight was 3600 and something rigged when Python built them. That was in the late 90's. Older models were a little heavier.