K plane hose...where to find new?

[Hondo Jet]

I blew a hose today. Looked at Bam, CP and Rexmar and did not find replacement. Where can I find a couple of these new?
http://i129.photobucket.com/albums/p222/HondoJet/P1050737.jpg

[DAREDEVIL]

I blew a hose today. Looked at Bam, CP and Rexmar and did not find replacement. Where can I find a couple of these new?
http://i129.photobucket.com/albums/p222/HondoJet/P1050737.jpg

mercruiser parts .com

[glassdave]

i've always had them made at a local industrial hose supplier. most places can whip them up while you wait.

[imco offshore]

by the looks of that hose, you might consider changing the rest while your at it. just a thought,!!

[slowride33]

http://www.mercruiserparts.com/Show_Pictures3.asp?dnbr=891720&ivar=images/COMMON/15117.png&inbr=8504&bnbr=345&bdesc=K+Plane%2C+280C%28846215A1+%2F+846215A02%29

14 32-845975 ----HOSE, Hydraulic (9.375 Inches) $36.74

[Hondo Jet]

Thank you for the info! Theres a hydraulic shop close to my office. I'll give them a chance first. Two of the four hoses are perfect, the other two looked like the one pictured.

[northernoffshore]

land and sea

[C_Spray]

My local hydraulic supplier quoted me $2.70/foot for the hose and $13.20 per fitting, installed. That was with regular unshielded dash 3 stainless line. For another $8.31 plus shipping, I could buy the Mercury part with clear heatshrink on it. I bought local.

[insanity]

Parker makes the PTH-3 hose that is braided with the protective cover. But its the fittings that are killer, unless you buy in bulk they are about $25 a piece.

[Hondo Jet]

My local hydraulic shop did not carry any fittings that small. After Slowride posted the part number the best price I found was $31 plus freight.

[Tony]

Call Doller Offshore, ask for Mindi or Dana. I had my local hydraulic shop make up a set that leaked and had rusted ends after one weekend of freshwater use. Ive had Doller's on the boat for close to ten years with zero problems. They were double flared SS ends with plastic coated braided SS hose. At the time they were supprisingly cheap for what they were.

[Hondo Jet]

I called Doller today, they had every siingle part I asked for in-stock. Hoses, tail O ring seal for TRS, transmission gasket for TRS, seal kit for TRS, solenoid for K plane, impeller and gasket for Sea pump. Prices were on track, not high or low, shipping was reasonable. Parts are on the way.

[Tony]

They are great people to deal with, Dana worked her ass off this summer straightening out a mis packaged part (from Merc) that Merc wanted me to pound sand on.