PDA

View Full Version : Livorsi tach....



fixxxer22
02-23-2010, 11:34 AM
I just took advantage of the sale at cpperformance for the platnum gauge set. I got the tach from livorsi and it has a sticker on the side indicating switch placment between 4 6 and 8 cylinder engines. Where is this switch? Is it just plug and play or is does this not apply to my application? Just wondering if i need to take it apart and set these switches to the appropriate position... If there is even switches contained in the unit.

Griff
02-23-2010, 02:37 PM
If you don't see the switch on the back of the tach, then its probably just preset for 8 cyl.

MarylandMark
02-23-2010, 05:05 PM
Need more info about the tach but here are all the tech documents.

Model #?

http://www.livorsi.com/tools.htm#t

VetteLT193
02-24-2010, 10:01 AM
I think when I installed mine it was behind a rubber plug in the back. pull the plug out and it exposes the circuit board with the dip switch on it. I wouldn't install without checking it first.

fixxxer22
02-24-2010, 11:16 AM
Thank you. I spend an ok ammount of money on this stuff and i did not want to go ripping it apart if i was not sure what i needed to do. Thanks for the help guys.