Spy Pic New 41' Offshore!!!!!

[Sean Stinson]

Spy Pic of a new 41 V bad a$$......A Cuban will kill me for posting this I am sure....Anyway if you want one in any configuration contact me!!!!!

[DollaBill]

So I guess I know how we get started LOL

[Wardey]

Hey that looks like @#$%%$ and the boat looks like a &%%$#@ !!!! Mahen

[LEOPAJM]

Does it start with a P ?

[DKwestern]

Panache!

[Dunaruna]

Very Nice.:sifone:

[stormrider]

Does it start with a P ?

Looks like their shop... but they all look alike.
Does that make me prejudiced?

[TIKI]

The front step is a lot further forward than what the line drawing shows on Pantera's site.

[thedonz]

Atleast they can't say i'm the one that posted it.....stay tuned it's beyond BADA$$ and it's going to be up there with the Cigs, OL and beyond....P1 is going to have a run for their money this year with this beast

[Dude! Sweet!]

I'm a little slow to this thread, but I know where that picture was taken... :sifone:


It's the most interesting boat in the world...

[Sean Stinson]

I am on the run the cuban mafia is after me.... but you guys guessed it....P1 will have a run for their money!!!

[thedonz]

I've been at the factory time after time following this build, it's amazing that's all I can say, these green eyes are on the warpath :sifone:

[Wild]

Where is the P factory now, i would like to go by there in a few weeks when im down, i know where it was, now its a shopping center or condos or something

[baywatch]

Me likey a lot!!! I can't wait to see it when it's finished.

[Biggus]

Great looking boat! I was wondering when it was going to surface!:cheers2:

Kurt

[Sean Stinson]

Where is the P factory now, i would like to go by there in a few weeks when im down, i know where it was, now its a shopping center or condos or something

Off the Palmetto Expressway west side on 66th av....if heading south get off at 74th st....go west turn left at 1st light on frontage road and follow around to 66th

[jayboat]

Off the Palmetto Expressway west side on 66th av....if heading south get off at 74th st....go west turn left at 1st light on frontage road and follow around to 66th

I could swing by on my way to the show...

do you think they would let me in with a camera in my hand? :sifone:

that thing is awesome.

[WARPARTY36]

Jay just get a hair cut and shave and they won't even recognize you:sifone:

[Team Tsunami]

Atleast they can't say i'm the one that posted it.....stay tuned it's beyond BADA$$ and it's going to be up there with the Cigs, OL and beyond....P1 is going to have a run for their money this year with this beast

P1 Europe or US?? Im assuming US since it would have to be a full canopy to run in Europe.

[Jassman]

excellent.. I was wondering when that would be started..looks great..:sifone:

[Buoy]

Looks great! Can't wait to see more.

[J-Bonz]

This is exciting to see take shape!! Cant wait to see the finsih product!!

[Roger 1]

I hope that it works out well. It's good to see a hull being pulled from those molds. I'd like to see some more pictures of it.

[Geronimo36]

Great to see that "boat" finally built after all these years...or at least the deck! ;)

[Roger 1]

I am on the run the cuban mafia is after me.... but you guys guessed it....P1 will have a run for their money!!!

While they're chasing you, how about circling back around and sniping a couple more pictures?

[db71]

What is this an old mold or another companies mold? I'm sure I could search but someone could fill me in probably quicker. I think it looks aweome the deck has a great classic look to it. I'm not a fan of the side by side seats will it have a filler panel to make a three man type setup?

[Geronimo36]

What is this an old mold or another companies mold? I'm sure I could search but someone could fill me in probably quicker. I think it looks aweome the deck has a great classic look to it. I'm not a fan of the side by side seats will it have a filler panel to make a three man type setup?

Apache USA which folded a number of years ago... Long story....VERY LONG....:ack2:

Found this lil gem of a pic on the other site..:eek:

[thedonz]

. I'm not a fan of the side by side seats will it have a filler panel to make a three man type setup?
Custom made to whatever style the customer wants.... this one is race ready as it's racing over seas:driving:

[phragle]

better to race over seas than under seas..........

[Tristar Racing]

Wow those molds are finally getting used. I wonder how much design rework was done by John (Cosker) to the design.

Regardless of all the bs Thad started, I heard from a few people that those molds were pretty awesome. I know #^ and !£%£ said they were concentrating on the smaller boats last time I asked about the 41. Can't wait to see more pictures.

(assuming this is the long awaiting €¥#*>¥+ 41 made with the molds Thad had designed for "Apache.")

[Chris]

The boat is supposedly going to a buyer in England.

I like the motto on Thad's card...

Never Surrender. OK.

[catastrophe]

The boat is supposedly going to a buyer in England.

I like the motto on Thad's card...

Never Surrender. OK.

Isnt there another boat in that shop from England??

[Chris]

I believe there is. There has been a rumor circulating about some controversy surrounding it.

[catastrophe]

I believe there is. There has been a rumor circulating about some controversy surrounding it.

To say the least.

[thedonz]

I believe there is. There has been a rumor circulating about some controversy surrounding it.

shhhhh :rofl:

[DollaBill]

I believe there is. There has been a rumor circulating about some controversy surrounding it.

In the perf boat world? never

[Rik]

P1 Europe or US?? Im assuming US since it would have to be a full canopy to run in Europe.

Europe. Super Sport Class. 525's and 6's.

[Team Tsunami]

Europe. Super Sport Class. 525's and 6's.

Thanks Rik. There's going to be alot of good competition in Super Sport this year!

[JO - PANTERABOAT]

Our new Pantera 41' is being built to take extreme punishment in rough water. We recently added a new T.S. bottom.

The new Pantera 41' on this thread will have a full pleasure set up with a port side cabin door entry, full cabin, powered by twin 525 EFI's and Bravo 1 XR drives.

We also have another new white 41' coming out of the mold in the next couple of days. The deck is already sitting on the floor.This one will have a custom 5 man bolster with padded race dash and will be powered like Rik says with twin staggered 525 EFI and # 6 drives with Arneson rocker plate tabs. I will post pictures of this one next week sometime.

We are going to offer our new Pantera 41' in 2 stages.

# 1 Hull and deck with a complete hand laid race lamination , custom 5 or 6 man race bolster, padded dash, custom deck hardware, engine room painted in smooth awl grip paint, and fuel tanks. Boat can also be lowered with a seamless finish ( no rub rail ). Delivery time frame for stage 1 45-60 days.
Boat must be rigged by a qualified experienced rig shop.

# 2 Complete boat done by Pantera with pleasure boat lay out and complete cabin. Power options are "unlimited".Over 6 foot cabin headroom.

We are putting out "special pricing" on the first 7 boats.

Plans are in the near future to also offer the 41' in a custom open deck version.

If anyone has any questions on the new 41' I can be emailed at Panterab@bellsouth.net

Regards,

Jo - Pantera Boats

[MarylandMark]

Plans are in the near future to also offer the 41' in a custom open deck version.


Nice!!

[McCaffertee]

WOW, awesome! Is this a stretched 36? Staggard or side by side?

[Steve 1]

Wow those molds are finally getting used. I wonder how much design rework was done by John (Cosker) to the design.

Regardless of all the bs Thad started, I heard from a few people that those molds were pretty awesome. I know #^ and !£%£ said they were concentrating on the smaller boats last time I asked about the 41. Can't wait to see more pictures.

(assuming this is the long awaiting €¥#*>¥+ 41 made with the molds Thad had designed for "Apache.")

Thad was alright he wanted nice stuff is all.

[McCaffertee]

I wonder how much design rework was done by John (Cosker) to the design.
Huh? OK, whats the story here? Rework? Are these molds from Mystic? or Pantera?

[thedonz]

WOW, awesome! Is this a stretched 36? Staggard or side by side?

Customer's choice

[Tristar Racing]

Thad was alright he wanted nice stuff is all.

I have no opinion either way as I was not involved with his dealings, all i know is bs usually follows from both sides when his name is brought up. Like I said, all I have consistently heard is the molds are beautiful.


Huh? OK, whats the story here? Rework? Are these molds from Mystic? or Pantera?

The molds were originally designed for Thad Allen of "apache," and pantera bought them when that deal fell apart. According to an article posted on OSO, John helped rework the design. (according to the article, he has helped with Pantera's design before) Just reporting what was said in the article, I have no direct info, if any of this is incorrect feel free to correct me.

http://www.offshoreonly.com/forums/attachments/pantera/287743d1184785114-41-panache-pantera0003-small-.jpg

[McCaffertee]

TRISTAR, thanks for the input, although I would like to hear more about where, how and why these molds came about. It is interesting to know the history and then the realization. I think Pantera is onto something here, just can't figure out what took so long!

[Steve 1]

Let me know I will post a thread on them!

[Tristar Racing]

Let me know I will post a thread on them!

I'd like to hear the history of them, the design, how they ended up at Pantera, etc.

Im always up for learning the inner workings of the marine industry, even if it results in a deleted thread, :)


TRISTAR, thanks for the input, although I would like to hear more about where, how and why these molds came about. It is interesting to know the history and then the realization. I think Pantera is onto something here, just can't figure out what took so long!

Jo and Pepe have said for a while now if someone wants a 41, the molds are ready to go. A small pic (of the deck) with some drawings have been on their website as well. I think it was a situation where they didnt have an interested buyer, so they were going to wait to pop a boat until one came around. Im extremely excited for them that they now have the opportunity to build this new model.

[Steve 1]

Pepe has been building Boats for a long time as well as a Racer and Record holder. My respect and Regards.

I will make a separate thread!

[baywatch]

Very cool. I can't wait for about five years until there are some used ones on the market so I can actually afford one. Definately tops on my "next boat list"

[JO - PANTERABOAT]

Pepe has been building Boats for a long time as well as a Racer and Record holder. My respect and Regards.

I will make a separate thread!

My respect go out to you!
Later,
pepe @ pantera.

[Expensive Date]

Any idea on weight of the pleasure version and speed with 525s?
Beautiful boat

[YoungPerformance]

As usual Pepe, another awesome boat. I'm ready when you are:sifone:
Eddie

[Dude! Sweet!]

Any idea on weight of the pleasure version and speed with 525s?
Beautiful boat

You mean with 3 525s? 41 is a lot of plastic to move with only 1100 hp. :sifone:

[JAIME]

hmm, how does Rik know about a boat thats in Panteras shop, that will have Arneson equip on it. Is it comming to Cali?:rolleyes:

[Edward R. Cozzi]

My respect go out to you!
Later,
pepe @ pantera.

Who is this "Pepe" guy?

[Steve 1]

Who is this "Pepe" guy?

Pepe Is a was an extreme rough water racer from the old days and Pantera Boats who BTW is the oldest boat builder around here under the same ownership, this guy who gave me some sound advice in the old days when I was at PH Factor custom boats off 58th street back in the 70's and wanted to start building my own boats.

[JO - PANTERABOAT]

Pepe Is a was an extreme rough water racer from the old days and Pantera Boats who BTW is the oldest boat builder around here under the same ownership, this guy who gave me some sound advice in the old days when I was at PH Factor custom boats off 58th street back in the 70's and wanted to start building my own boats.

Steve,
That was over 35 years ago, look @ all the grief that I saved you!
Maybe I should have listened to myself, but NO I am too stubborn.
Oh well, time will close yesterdays doors!:ack2:
Later,
pp.

PS, Mr Ed Cozzi the boat racer was one of my childhood idols

[Steve 1]

Steve,
That was over 35 years ago, look @ all the grief that I saved you!
Maybe I should have listened to myself, but NO I am too stubborn.
Oh well, time will close yesterdays doors!:ack2:
Later,
pp.

PS, Mr Ed Cozzi the boat racer was one of my childhood idols

Sorry I was only trying to fill in a blank spot,One thing you told us was if you start having gelcoat problems change the gelcoater I asked Machine and you said No the person well over the years I have changed a lot of gelcoaters.

[JO - PANTERABOAT]

Sorry I was only trying to fill in a blank spot,One thing you told us was if you start having gelcoat problems change the gelcoater I asked Machine and you said No the person well over the years I have changed a lot of gelcoaters.

I think that there was more to that conversation IF I recall it correct.
I "THINK" it was something that Mr. Cal Connel (remember him?) had told me one day.
Needless to say he was quite a bit older than myself who @ the time was in my middle 20's. Mr Connel said,
pepe you better decide quick if you want to be a good boat builder or a good businessman! Up till today I have NOT forgotten those words.
Later, pp @ pantera. :willy_nilly:

[Steve 1]

I think that there was more to that conversation IF I recall it correct.
I "THINK" it was something that Mr. Cal Connel (remember him?) had told me one day.
Needless to say he was quite a bit older than myself who @ the time was in my middle 20's. Mr Connel said,
pepe you better decide quick if you want to be a good boat builder or a good businessman! Up till today I have NOT forgotten those words.
Later, pp @ pantera. :willy_nilly:

Yes sir there was much much more to that conversation in those days we were young, the boat business was very exciting and in our crew Anglo, Donald and myself wanted Haggerty to build again. you ran a Pantera 24 with a 482 and a #3 speedmaster if I recall correctly and we had a couple very nasty races that season.We were in 30 Corsas.

[Sean Stinson]

More spy pics....Contact me to discuss

[Sean Stinson]

Now when you're over your "woodie"......In the words of my idol Al Bundy....Let's Rock!!!!!!

[cosmic12]

OK Sean quit with the tease's we know you have more pics......lets see'm:rolleyes:

[Roger 1]

Nice work inspector Stinson! It's great to see this boat finally come to life.

[Steve 1]

Looks Beautiful guys nice job!

[thedonz]

More spy pics....Contact me to discuss

PM me your email thanks...

[JO - PANTERABOAT]

A few pics. of the race 41' in the works. Complete hand laid race lamination. Split hatches will also have custom dual intake Naca Ducts.Should have the hull out in a few days. I will post pics. as it comes out of the mold.

JO

[JO - PANTERABOAT]

1 more pic.

[MarylandMark]

Sean- could you clarify your involvement in this project?

Asking from the prospective of if you were are going to be involved in the race aspects of #2? Throttles/Driver, or crew chief or ?.

[Dude! Sweet!]

Sean, what's up? Is this ad for the race boat or for another one?

http://www.seriousoffshore.com/classifieds/index.php?page=out&id=684

[JO - PANTERABOAT]

Sean, what's up? Is this ad for the race boat or for another one?

http://www.seriousoffshore.com/classifieds/index.php?page=out&id=684

Neither one of these two 41's on the floor. These 2 are spoken for.
One is a race boat and the other a pleasure boat.
It would be the next boat to go in the mold.

Later,
pp @ pantera.

[Dude! Sweet!]

Neither one of these two 41's on the floor. These 2 are spoken for.
One is a race boat and the other a pleasure boat.
It is the next boat to be go in the mold.

Later,
pp @ pantera.

Nice to hear that! Thanks boss!

[rchevelle71]

Neither one of these two 41's on the floor. These 2 are spoken for.
One is a race boat and the other a pleasure boat.
It would be the next boat to go in the mold.

Later,
pp @ pantera.

Glad to see your Staying Busy. Hope all goes well with the 41:driving:

[Sean Stinson]

Sean- could you clarify your involvement in this project?

Asking from the prospective of if you were are going to be involved in the race aspects of #2? Throttles/Driver, or crew chief or ?.

I am just a squirrel trying to get a nut....

Truth is I want to rig one pretty bad but cant swing the dough to buy it....so I have to sell one so I can rig it!!!!!

[Bobby Sheer]

Congrats Pepe. You have another winner. As I have said in the past, you are my hero. Bobby

[Sean Stinson]

Congrats Pepe. You have another winner. As I have said in the past, you are my hero. Bobby

Where were you for lunch today bro????

[cougarman]

I am just a squirrel trying to get a nut....

Truth is I want to rig one pretty bad but cant swing the dough to buy it....so I have to sell one so I can rig it!!!!!




Sounds like a fun angle to approach it with. Best of Luck!


Jon

[Geronimo36]

Have any of the boats been tested yet?

Looking forward to seeing the results!!!!!

[JO - PANTERABOAT]

Where were you for lunch today bro????

Freezing his cojones up in the NE!!! :ack2:
pp.

[ILMORdude]

Raceboat??? What series and what power??

[Sean Stinson]

Raceboat??? What series and what power??

P1......don't know the power yet bro!!!! You could put your spin on here though because I know you are legal in P1

[JO - PANTERABOAT]

Raceboat??? What series and what power??

Mercs 525 EFI w/ #6 drives for P-1
Later,
pepe @ pantera.

[Bgchuby01]

Sean you going to test it right side up or upside down?

[Sean Stinson]

Sean you going to test it right side up or upside down?

this has a good bottom not the eject you in the turn bottom!!!

[ILMORdude]

Pepe, its not too late to call us! Lol we can do 570 or 625 or new 650 or 725

[Steve 1]

This is way cool watching all this come together, Very Nice Guys.

[DAREDEVIL]

mhhhhhhh,525's.........come on,,,its a pantera not a turd !!!!!????

Give the baby some room to breath !!!

[Sean H]

HP/weight and a speed limit, you don't need much HP in that class.

[DollaBill]

this has a good bottom not the eject you in the turn bottom!!!

hahahahahha

[thedonz]

mhhhhhhh,525's.........come on,,,its a pantera not a turd !!!!!????

Give the baby some room to breath !!!

you'll see :sifone::drool5:

[Sean Stinson]

you'll see :sifone::drool5:

Did you get my PM bro

[JO - PANTERABOAT]

Here is a preliminary drawing for the new P1 SuperSport class Pantera 41' race boat.Powered by staggered twin Mercury Racing 525 EFI's with # 6 drives.

JO

[thedonz]

Jo i'm glad they went with this one instead of the other design you showed me....

[DAREDEVIL]

Here is a preliminary drawing for the new P1 SuperSport class Pantera 41' race boat.Powered by staggered twin Mercury Racing 525 EFI's with # 6 drives.

JO

OK, know i can i see one with american flag and DAREDEVIL on the side ?? LOL:kiss::cheers2::sifone:

[Steve 1]

The "08" Boat has my vote, Nice!

[JO - PANTERABOAT]

The "08" Boat has my vote, Nice!

I hope that all the work that went into the 41' project will be a complete success.
I am very happy that Jo will race in Europe exactly 30 years after I did it,
very happy to see my son play in the big leagues against all the top Europeans teams! :driving:
Definetely Pantera is putting our reputation on the line!
Later,
pepe @ pantera.

[thedonz]

I hope that all the work that went into the 41' project will be a complete success.
I am very happy that Jo will race in Europe exactly 30 years after I did it,
very happy to see my son play in the big leagues against all the top Europeans teams! :driving:
Definetely Pantera is putting our reputation on the line!
Later,
pepe @ pantera.

Pantera NEVER lost it's reputation and the history well; that's another thread:sifone:....30 yrs and hopefully another 30

[JO - PANTERABOAT]

Actually 2010 makes 35 years in the biz.

JO

[THEJOKER]

I hope that all the work that went into the 41' project will be a complete success.
I am very happy that Jo will race in Europe exactly 30 years after I did it,
very happy to see my son play in the big leagues against all the top Europeans teams! :driving:
Definetely Pantera is putting our reputation on the line!
Later,
pepe @ pantera. Run hard Jo and stay dry! Best of luck!

[JO - PANTERABOAT]

Thanks Brian.

JO

[Dude! Sweet!]

Lookin' good! Joey, man... I didn't know you were going over with the boat. Good work and good luck! I know you'll make La Familia Pantera (all your loyal supporters and customers) proud!

[JO - PANTERABOAT]

Lookin' good! Joey, man... I didn't know you were going over with the boat. Good work and good luck! I know you'll make La Familia Pantera (all your loyal supporters and customers) proud!

Many years ago I was in raceboats w/ some of the bigest name throttleman,
I will guarantee you that Jo could run w/ any of them!
No exageraton because he is my son, IF he wasn't that good I would tell you just the same.

He has 2 speeds, 1) tied up to the dock and 2) b*lls to the wall b4 he sees the green flag go up!

In the 70's and 80's I did not win many BUT the ones that I did were from start to finnish in the very front. :willy_nilly:
Later,
pepe

[THEJOKER]

Many years ago I was in raceboats w/ some of the bigest name throttleman,
I will guarantee you that Jo could run w/ any of them!
No exageraton because he is my son, IF he wasn't that good I would tell you just the same.

He has 2 speeds, 1) tied up to the dock and 2) b*lls to the wall b4 he sees the green flag go up!

In the 70's and 80's I did not win many BUT the ones that I did were from start to finnish in the very front. :willy_nilly:
Later,
pepe

Yea JO don't play. The 1st time we butted heads was W.Palm in 1999 right after a hurricane. He dominated in rough water. JO you have to be excited , what a great opportunity to showcase your product! I'm envious.......:USA:

[Dude! Sweet!]

Many years ago I was in raceboats w/ some of the bigest name throttleman,
I will guarantee you that Jo could run w/ any of them!
No exageraton because he is my son, IF he wasn't that good I would tell you just the same.

He has 2 speeds, 1) tied up to the dock and 2) b*lls to the wall b4 he sees the green flag go up!

In the 70's and 80's I did not win many BUT the ones that I did were from start to finnish in the very front. :willy_nilly:
Later,
pepe

I'm going to have to extend my July trip to FL this year to get some lessons... I don't want to make you guys look bad running out here this year! :sifone:

[Steve 1]

Many years ago I was in raceboats w/ some of the bigest name throttleman,
I will guarantee you that Jo could run w/ any of them!
No exageraton because he is my son, IF he wasn't that good I would tell you just the same.

He has 2 speeds, 1) tied up to the dock and 2) b*lls to the wall b4 he sees the green flag go up!

In the 70's and 80's I did not win many BUT the ones that I did were from start to finnish in the very front. :willy_nilly:
Later,
pepe

JO had a great teacher also he grew up in and around high performance boats and Racing ,How can you beat that? Best of luck to him.

[Sean Stinson]

JO had a great teacher also he grew up in and around high performance boats and Racing ,How can you beat that? Best of luck to him.

His motocross background also comes in handy!!!!:sifone::sifone:

[JAIME]

:driving:very excited to hear this, congrats!!:cheers2:J

[Steve 1]

His motocross background also comes in handy!!!!:sifone::sifone:

Oh yes a very tough motor sport there ,does not get any tougher!

[JAIME]

Jo i'm glad they went with this one instead of the other design you showed me....

whos they?

[JO - PANTERABOAT]

His motocross background also comes in handy!!!!:sifone::sifone:

Did you know that Jo drag raced professionally @ 16 years of age in PRO-STOCK ? Back then he would run a best of 7.40 @ 188 mph.
I think that up till today he still holds the record for the youngest NHRA pro driver.
We campaigned a Camaro in Pro stock sponsored by Benihana / Rocki Aoki.
I will ask him to post some pics if anybody would like to see them.
Later,
pp.
By the way Jo jr. has been racing MotoX for about a 1 1/2 years he turned 4 one week ago, now he is starting to drive a "baby" go-kart!
You have to start them young!!!

[JO - PANTERABOAT]

Yea JO don't play. The 1st time we butted heads was W.Palm in 1999 right after a hurricane. He dominated in rough water. JO you have to be excited , what a great opportunity to showcase your product! I'm envious.......:USA:

Did somebody say New York ??? I am listening........
pp.

[Sean Stinson]

Did somebody say New York ??? I am listening........
pp.

Offshore events has the permits in place for the Miami - New York run!!!!

[rchevelle71]

Did you know that Jo drag raced professionally @ 16 years of age in PRO-STOCK ? Back then he would run a best of 7.40 @ 188 mph.
I think that up till today he still holds the record for the youngest NHRA driver.
We campaigned a Camaro Pro stock sponsored by Benihana / Rocki Aoki.
I will ask him to post some pics if anybody would like to see them.
Later,
pp.
By the way Jo jr. has been racing MotoX for about a 1 1/2 years he turned 4 one week ago, now he is starting to drive a "baby" go-kart!
You have to start them young!!!

Go ahead and post the pics, also the one of him as a kid in the raceboat with you. Happy you guys are getting back into racing:driving:

[THEJOKER]

Offshore events has the permits in place for the Miami - New York run!!!!

Hmmmmmmm you , pp and myself....there's a thought!

[Geronimo36]

Here is a preliminary drawing for the new P1 SuperSport class Pantera 41' race boat.Powered by staggered twin Mercury Racing 525 EFI's with # 6 drives.

JO

I love those Apache 41'/36' lines!:driving:

[Tank]

this has a good bottom not the eject you in the turn bottom!!!

Driver error!!!:smash::sifone:


What a cool project. Always loved the lines of Pantera's and this new mold seems to fit the aggressive style Pantera has become known for.

Jo & Pepe, good luck on your future endeavors, I'll be waiting with baited breath to hear the results!

[JO - PANTERABOAT]

Pepe, its not too late to call us! Lol we can do 570 or 625 or new 650 or 725

I forgot to tell you that Mr. Paul Ray was here @ Pantera exactly one year ago while he was doing some testing @ Homestead Speedway.
You know who Im talking about? Is he still there?
Later,
pepe.
PS, Your motors are real nice and well liked in P1.

[Caincando1]

I've got nothing to add except I wish the best for Pantera. They are the boats that got me excited about this sport. I'm a fan and hope they continue making killer boats for years to come.

[stormrider]

Did somebody say New York ??? I am listening........
pp.

How about the 'round Long Island race'?

[lowblue320]

Actually 2010 makes 35 years in the biz.

JO

Very well deserved, great boat and super family. Jo, when are you going take a ride with me in my boat so that you throttle?

[JO - PANTERABOAT]

Go ahead and post the pics, also the one of him as a kid in the raceboat with you. Happy you guys are getting back into racing:driving:


Here you go.

[Sean Stinson]

Driver error!!!:smash::sifone:


What a cool project. Always loved the lines of Pantera's and this new mold seems to fit the aggressive style Pantera has become known for.

Jo & Pepe, good luck on your future endeavors, I'll be waiting with baited breath to hear the results!

Well seeing how I was throttling it wasn't my fault then......:cheers2::cheers2:

[Sean Stinson]

I forgot to tell you that Mr. Paul Ray was here @ Pantera exactly one year ago while he was doing some testing @ Homestead Speedway.
You know who Im talking about? Is he still there?
Later,
pepe.
PS, Your motors are real nice and well liked in P1.

Yes Mr. Paul Rey is still there....we should visit with him at the boat show Pepe

[JO - PANTERABOAT]

Very well deserved, great boat and super family. Jo, when are you going take a ride with me in my boat so that you throttle?

Thanks Andy, will go for a run one of these weekends.

Regards,

JO

[JO - PANTERABOAT]

Race 41' hull coming out of the mold tomorrow. I will post pics. soon.

JO

[ILMORdude]

The Ilmor crew will be at the Miami show in booth R97. Be sure to stop in. Ps- Ive always said my first performance boat will be a Pantera!

[Steve 1]

#122 Way Cool!!!!!!

[JO - PANTERABOAT]

Race 41' hull coming out of the mold this morning.

[Sean Stinson]

Nice I will stop by tomorrow bro!!!

[Buoy]

Race 41' hull coming out of the mold this morning.

Looks GREAT.

Damn, popping that from the mold would have to feel similar to being in the delivery room for one of your children.

Can't wait to see it completed.

[THEJOKER]

Looks GREAT.

Damn, popping that from the mold would have to feel similar to being in the delivery room for one of your children.

Can't wait to see it completed. Funny I've always said that!

[Steve 1]

Floating the first one off the trailer is like birth of a son.

[LEOPAJM]

Race 41' hull coming out of the mold this morning.

Congrats guys ! :driving:

[JO - PANTERABOAT]

Thanks LEOPAJM.

Here is a new pic. of the race 41' hull and deck being put together for P1. I can't wait to test this new Pantera 41' in some real rough water out in the ocean.

JO

[JO - PANTERABOAT]

Here is the "pleasure version" that will be powered by twin 525 EFI's. This new Pantera 41' will have a full cabin with over 6 foot of headroom. We fabricated our own style cleats and custom hardware which are being powdercoated flat black. The custom upholstery is being done in two tones matching the hull and deck gelcoat colors.

I will take better pictures next week !

JO

[Buoy]

Damn JO, are you guys getting any sleep??
Looks awful busy in the shop.
I'm very glad to hear it.
The new hull looks like a winner, and I can't wait to see more, and the results of how she performs.
Some guys get excited about stupid trivial crap like the superbowl, I get excited about things like the birth of a new raceboat.

[baywatch]

Here is the "pleasure version" that will be powered by twin 525 EFI's. This new Pantera 41' will have a full cabin with over 6 foot of headroom. We fabricated our own style cleats and custom hardware which are being powdercoated flat black. The custom upholstery is being done in two tones matching the hull and deck gelcoat colors.

I will take better pictures next week !

JO

bad a**!!!

:driving::driving:

[later]

will the 41 be a side by side are staggered

later

[Sean Stinson]

will the 41 be a side by side are staggered

later

Anyway you want it......build it and they will come was a saying.....but the new saying is " Come and we will build it"

[DKwestern]

Must be deeper than it looks to get 6' headroom, probably just the angle. Looks great!!
Same deck on both boats?

[Sean Stinson]

Must be deeper than it looks to get 6' headroom, probably just the angle. Looks great!!
Same deck on both boats?

Let me put it this way....I am a tall guy....when I step down into the boat and stand in the center of the boat I have a good hand width above my head and I am 6'5"

[DAREDEVIL]

Let me put it this way....I am a tall guy....when I step down into the boat and stand in the center of the boat I have a good hand width above my head and I am 6'5"

U where 6'5".....u know with age it goes backwarts...LOLOL:sifone:

[Sean Stinson]

U where 6'5".....u know with age it goes backwarts...LOLOL:sifone:

I know I was 6'6" and am starting to shrink like everything else!!!

[DKwestern]

Must be deeper than it looks to get 6' headroom, probably just the angle. Looks great!!
Same deck on both boats?


Let me put it this way....I am a tall guy....when I step down into the boat and stand in the center of the boat I have a good hand width above my head and I am 6'5"

Sweet, I'm 6'6". I figured it was just the angle of pics and "flat" looking deck. We actually met briefly back at the COPS party in Grand Rapids around 2004 and rememer you being tall.

[Jassman]

Let me put it this way....I am a tall guy....when I step down into the boat and stand in the center of the boat I have a good hand width above my head and I am 6'5"



and.. I'm Johnny Holmes...:)how ya doing bro...hell of a boat.:sifone:

[BattleCry]

I know I was 6'6" and am starting to shrink like everything else!!!

Short and no girth!

[Geronimo36]

Let me put it this way....I am a tall guy....when I step down into the boat and stand in the center of the boat I have a good hand width above my head and I am 6'5"

One of the advantages of a raised deck vs. the flat-deck in a pleasure boat! ;)

[38fountainSC]

Would love to see pics of the cabin when its done.

[JO - PANTERABOAT]

38FountainSC,

I will post pics. of the "pleasure version" cabin as we get closer to that stage of the build.

Thanks,

JO

[Audiofn]

Very cool that Pantera is invovled in this thread! Can't waite to see the finished product.

[Cookee]

Thanks LEOPAJM.

Here is a new pic. of the race 41' hull and deck being put together for P1. I can't wait to test this new Pantera 41' in some real rough water out in the ocean.

JO

Is that the boat for Martin?

[JO - PANTERABOAT]

Is that the boat for Martin?

Yes.

[JO - PANTERABOAT]

A few new pics. of the 41' race in the works.

JO

[Steve 1]

Pepe and Jo Looks great, Nice Job!!!

[Steve 1]

Pepe make sure to show Sean our #1 So Florida boat building Secret, the Baked Pork, Frijoles negros and Cuban coffee/Nitro methane

[JO - PANTERABOAT]

Pepe make sure to show Sean our #1 So Florida boat building Secret, the Baked Pork, Frijoles negros and Cuban coffee/Nitro methane

Sean has become a real "305" home boy!!!
pp.

[cougarman]

Joe,

Have any customers looking at Mercury's new 1,300 / 1,350 Turbo engines for the 41' ?


http://mercuryracing.com/1300/



Make for a bad A** Ride.




Jon

[Buoy]

Joe,

Have any customers looking at Mercury's new 1,300 / 1,350 Turbo engines for the 41' ?


http://mercuryracing.com/1300/



Make for a bad A** Ride.




Jon

I've been thinking the same thing all day.
That would be one over the top package!

[Premier Perf]

Anything is possible with the 41.. power for Panteras is unlimited and life time warrenty on the hull either race/pleasure or PR

[rchevelle71]

What is the expected top speed with the 525's in the raceboat? I know this is a whole new design, probably much lighter, steps etc., but if it were an old resin bucket Apache with 525's, what would it go, like 50??

[Premier Perf]

What is the expected top speed with the 525's in the raceboat? I know this is a whole new design, probably much lighter, steps etc., but if it were an old resin bucket Apache with 525's, what would it go, like 50??

very close to *** mph:driving:...Jo fill in the blank

[LSUbaja]

good luck to you guy's and the new boats! watching youtube of pantera boats race and the power boats running the muddy waters of south louisiana got me hooked at 16 and in my boat by 21..... hope to be in a 41 some day!!!!! but ill take any pantera!

[OneBadInjun]

Anyway you want it......build it and they will come was a saying.....but the new saying is " Come and we will build it"I think I'm coming right now...lol.:eek:

[rchevelle71]

very close to *** mph:driving:...Jo fill in the blank

I think that would be awesome, if it can run that #with 525's, I'll take mine with the 1350's:driving:

[Premier Perf]

good luck to you guy's and the new boats! watching youtube of pantera boats race and the power boats running the muddy waters of south louisiana got me hooked at 16 and in my boat by 21..... hope to be in a 41 some day!!!!! but ill take any pantera!

They are truely AMAZING boats. I have had 2 prio to being a dealer and the way they handle the rough is incrediable which is what has led to become part of the their team. Give us a call when you are in town and we'll show you the factory. You have to start some where maybe a 28 :driving:

Premierfrc@aol.com
305-949-1700

[LSUbaja]

that would be awsome to see the factory! from what i have seen on video the 28 would put my 25' baja to shame lol....

[Premier Perf]

Call me when you come into town

[JO - PANTERABOAT]

Supersport class in P1 has a limit of 90 MPH this 2010 race season. It is a power to weight ratio series and with the twin Mercury Racing 525 EFI's this new Pantera 41' will need to weigh in at approximately 10,500 pounds. My Father and I are concentrating on the rough water set up since most races in P1 are known to be very rough. Very important will be acceleration since this will most likely be one of the largest boats in the Supersport class. I am confident this new Pantera 41' will be very fast and really perform in extreme sea conditions !

JO


What is the expected top speed with the 525's in the raceboat? I know this is a whole new design, probably much lighter, steps etc., but if it were an old resin bucket Apache with 525's, what would it go, like 50??

[Team Tsunami]

Its great to see Pantera going to race in SuperSport with their new 41 this year!! There's a lot of new boat racing in that class! Should be a great season!!

[rchevelle71]

Supersport class in P1 has a limit of 90 MPH this 2010 race season. It is a power to weight ratio series and with the twin Mercury Racing 525 EFI's this new Pantera 41' will need to weigh approximately 10,500 pounds. My Father and I are concentrating on the rough water set up since most races in P1 are known to be very rough. Very important is the acceleration since this will most likely be one of the largest boats in the Supersport class. I am confident this new Pantera 41' will be very fast and really perform in extreme sea conditions !

JO

Thanks Jo,

I know you build your boats solid, as did Apache, just didnt seem like much motor for a 41 foot boat.

[Buoy]

that would be awsome to see the factory! from what i have seen on video the 28 would put my 25' baja to shame lol....

Definitely worth the trip!! You'll spend over an hour just in the offices looking at the pics and memorabilia on the walls.
And the factory itself shows that these are handcrafted boats, not a production line. Each one is custom made without a doubt.

[JO - PANTERABOAT]

Thanks Jo,

I know you build your boats solid, as did Apache, just didnt seem like much motor for a 41 foot boat.

You could have twin 700 hp motors and weigh in @ close to 14k pounds, which will be harder on the eqpt.

Besides that, the Merc 525 EFI is a bullet proof motor!
Hope to have explained the why of the smaller motors.

JO - Pantera boats.

[Jassman]

You could have twin 700 hp motors and weigh in @ close to 14k pounds, which will be harder on the eqpt.

Besides that, the Merc 525 EFI is a bullet proof motor!
Hope to have explained the why of the smaller motors.

JO - Pantera boats.



Joe, on the 525's are you able to put the NXT drives behind them.. or are you stuck with having to use the Bravo's.

[JO - PANTERABOAT]

Merc #6 speedmaster
JO.

[Jassman]

Merc #6 speedmaster
JO.

cool..thanks....

[TIKI]

How's it coming along?

[Sean Stinson]

Joe, on the 525's are you able to put the NXT drives behind them.. or are you stuck with having to use the Bravo's.

Whats up bro will be in your state next week but a little ways away from you!!!!!


Pepe and Jo I am out this week I will call you when I get back to civilization!!!!!

[baywatch]

What is the expected top speed with the 525's in the raceboat? I know this is a whole new design, probably much lighter, steps etc., but if it were an old resin bucket Apache with 525's, what would it go, like 50??

Depends on the old resin bucket (they all weighed different) Heavy one 63mph light one 68mph:driving:

That is what is so cool about technology look at what a 38' tg straight bottom runs with the same power as a a TS Gun. Hell, a 39' Tg Unlimited with 700's runs 105 or so, what would it take a straight bottom to do that. To me this is the coolest endeavor I have seen in some time.

Personally, If I hit the powerball I will be ordering one with diesels and ASD's and start spending my days chasing Bob the Builder around the caribbean. Keep the pics coming!!!

[rchevelle71]

Depends on the old resin bucket (they all weighed different) Heavy one 63mph light one 68mph:driving:

That is what is so cool about technology look at what a 38' tg straight bottom runs with the same power as a a TS Gun. Hell, a 39' Tg Unlimited with 700's runs 105 or so, what would it take a straight bottom to do that. To me this is the coolest endeavor I have seen in some time.

Personally, If I hit the powerball I will be ordering one with diesels and ASD's and start spending my days chasing Bob the Builder around the caribbean. Keep the pics coming!!!

Mine is getting outboards, and a huge cockpit:cheers2:

[38fountainSC]

Yea, we haven't seen any updates in a while.
I'm with you Baywatch that would be exactly what I would do too. New Pantera cruising the Florida poker run circuit.

[MarylandMark]

Mine is getting outboards, and a huge cockpit:cheers2:

:cheers2:

[OneBadInjun]

Mine is getting outboards, and a huge cockpit:cheers2:

Aronow or Kramer would admire you for that! They loved outboards.:leaving:

[rchevelle71]

Aronow or Kramer would admire you for that! They loved outboards.:leaving:

I never was until I moved to Florida, and saw what salt does to an I/O. Then I got sick of hanging upside down in 90 degrees and 90% humidity to fix it:rolleyes:, now with the outboards, I can stand upright, and have a beer in one hand, and a wrench in the other. Gotta love how easy it is to remove the outboard, and just store it in the corner:sifone:

[Sean]

Supersport class in P1 has a limit of 90 MPH this 2010 race season. It is a power to weight ratio series and with the twin Mercury Racing 525 EFI's this new Pantera 41' will need to weigh in at approximately 10,500 pounds. My Father and I are concentrating on the rough water set up since most races in P1 are known to be very rough. Very important will be acceleration since this will most likely be one of the largest boats in the Supersport class. I am confident this new Pantera 41' will be very fast and really perform in extreme sea conditions !

JO


Do you think you'll make 10,500 or will you have to add weight to make the class?

[JO - PANTERABOAT]

Hello Sean,

We went with a 360 gallon fuel capacity on this new Pantera 41' race boat so we will be able to add weight by adding fuel if need be. Once we complete the boat will weigh it with no fuel and see where we are at. Will be doing alot of testing out in the ocean and in the bay.

JO

[JO - PANTERABOAT]

Here is the latest version we are working on now for the new Panter 41' model.

The "6 pack" model will include: 1/2 cabin, custom 6 man bolster, padded dash, custom padded race hatches, and custom deck hardware.

Ideal power would be a pair of staggered Mercury Racing 700 SCI. We have "unlimited" power options.

What do you guys think ? This is my style of boat !

JO

[Buoy]

Here is the latest version we are working on now for the new Panter 41' model.

The "6 pack" model will include: 1/2 cabin, custom 6 man bolster, padded dash, custom padded race hatches, and custom deck hardware.

Ideal power would be a pair of staggered Mercury Racing 700 SCI. We have "unlimited" power options.

What do you guys think ? This is my style of boat !

JO

JO, that looks BADAZZ!!!
Can't wait to see it completed!

[lettuce]

Would there be an option of a short stagger in order to still have a pleasure cockpit ( 2 bolsters and a bench) with a 1/4 cabin? Just trying to get the best of both worlds!

[bigboat28]

It does look nice.

[Bobcat]

I think the X- dimension needs to be raised:leaving:

[MarylandMark]

lowered...

See how a man without the shakes can draw a perfect circle? :cheers2:

[Buoy]

lowered...

See how a man without the shakes can draw a perfect circle? :cheers2:

That just shows that you've already had several drinks to ward off the shakes.:cheers2:

Sorry to sidetrack the thread...:iamwithstupid:

[Dude! Sweet!]

Here is the latest version we are working on now for the new Panter 41' model.

The "6 pack" model will include: 1/2 cabin, custom 6 man bolster, padded dash, custom padded race hatches, and custom deck hardware.

Ideal power would be a pair of staggered Mercury Racing 700 SCI. We have "unlimited" power options.

What do you guys think ? This is my style of boat !

JO


Very nice! You dogs didn't say a word about any of this when we were talking about karting!

[Bobcat]

lowered...

See how a man without the shakes can draw a perfect circle? :cheers2:
:smash:

That just shows that you've already had several drinks to ward off the shakes.:cheers2:

Sorry to sidetrack the thread...:iamwithstupid:

:sifone:

[MarylandMark]

Busted!

[Jassman]

man I cant wait till this boat is done..

[slpcamaross97]

here is the latest version we are working on now for the new panter 41' model.

The "6 pack" model will include: 1/2 cabin, custom 6 man bolster, padded dash, custom padded race hatches, and custom deck hardware.

Ideal power would be a pair of staggered mercury racing 700 sci. We have "unlimited" power options.

What do you guys think ? This is my style of boat !

Jo

looks great.

[insanity]

Just curious, how thick is the coring in the side of the hull? I see in other pictures the bulkheads are laminated to the primary coring, no need to double up the core where the bulkheads mount to spread out the load?

[TIKI]

How's progress?

[JRalston]

Sweet ride!

[JO - PANTERABOAT]

Race 41' is getting sprayed in Ferrari Red this weekend. I will post pictures in a day or two.

The pleasure 41' is also moving right along.

JO

[JO - PANTERABOAT]

This picture was taken last week as we were fitting the new race dash and working on the new custom 2 man race bolster. Also deck and hull sides getting ready for paint. More pictures coming in a bit. Custom bolster and race dash are being done in yellow. Hull and deck are now painted Ferrari Red with custom black hardware.

JO

[THEJOKER]

Nice JO

[Buoy]

Looks Great!
Really looking forward to seeing the next installment of pics!

[Mange]

Looks awesome!!!

That's pretty cool with a two man 41 race boat. Can't wait to see some more
pics :)

So this one is going to be with hp525's and SSM VI right?

Great job and when I see the bolster frame I come thinking about
when Tomas did some job on his 5 man bolster for his 28 F1.



//Mange

[JO - PANTERABOAT]

Thanks Brian. Post new pics. soon.

Mange, Power twin Mercury Racing 525 EFI with # 6 drives in a staggered configuration. Custom 2 man race bolster will also have a custom hatch covering a simple rear seat.

Jo

[DAREDEVIL]

This picture was taken last week as we were fitting the new race dash and working on the new custom 2 man race bolster. Also deck and hull sides getting ready for paint. More pictures coming in a bit. Custom bolster and race dash are being done in yellow. Hull and deck are now painted Ferrari Red with custom black hardware.

JO

Jo, is it going to be a sit down ?????? I HOPE SO !!!!! LOL:cheers2:

[JO - PANTERABOAT]

Stand up:driving: Maybe in the near future you will see a canopied Super Vee or Evolution class sit down Pantera 41' race boat.

Here is a pic. of the engine room. Built to take extreme punishment !

JO

[JAIME]

nice, thanks for sharing Joe.

[Pat Bates]

Holy crap! This thread rocks! I cannot wait for the next set of pics.

One of these days...

[DAREDEVIL]

Stand up:driving: Maybe in the near future you will see a canopied Super Vee or Evolution class sit down Pantera 41' race boat.

Here is a pic. of the engine room. Built to take extreme punishment !

JO

Did not ecspect anything else from u !!!!!!!!!!!!!

ALWAYS SOLID AS A ROCK,,,,and lets talk about the EVO class !!!!!!!!
mmmmmmhhhhhh...u do take old trad ins ??? LOL :eek::rolleyes:

[Mange]

Here is a pic. of the engine room. Built to take extreme punishment !

JO

I hope with god (and you should know I am Atheist :p ) we will be able
to see this punishment LIVE on the CORRECT side of the pond :sifone:

State of the art!! Top Notch!!

Is this going to be a side-by-side engine setup JO?

//Mange

[stormrider]

Thanks Brian. Post new pics. soon.

Mange, Power twin Mercury Racing 525 EFI with # 6 drives in a staggered configuration. Custom 2 man race bolster will also have a custom hatch covering a simple rear seat.

Jo

:cheers2:

[Wylie-Rat]

Boat looks awesome guys... Can't wait to see some more pictures as you put that Bad Boy together! That boat is going to rock... :driving:

[Tomas Wallin]

I hope with god (and you should know I am Atheist :p ) we will be able
to see this punishment LIVE on the CORRECT side of the pond :sifone:

State of the art!! Top Notch!!

Is this going to be a side-by-side engine setup JO?

//Mange
Staggered!:sifone:


Jo - Are you using balsa in the hull sides in the engine room (that is seen in the pic)? Or what sandwich material are you using?

[JO - PANTERABOAT]

Tomas, Deck and Hull sides do have Balsa.

Here is a transom pic. We decided on Arneson rocker plate tabs.I will post more pics. soon. We are spraying the windscreen tonight in flat black.Split engine hatches are also being sprayed Ferrari red. Custom deck hardware black in color.

JO

[lowblue320]

Tomas, Deck and Hull sides do have Balsa.

Here is a transom pic. We decided on Arneson rocker plate tabs.I will post more pics. soon. We are spraying the windscreen tonight in flat black.Split engine hatches are also being sprayed Ferrari red. Custom deck hardware black in color.

JO

That red looks great, you guys do a killer job....

[JO - PANTERABOAT]

Thanks Andy.

Here is a pic. of the bow. Custom deck rail powdercoated black.

Better pics. coming.

JO

[Mange]

That's a nice move with the Arneson rocker plate tabs. Just like on the
35 Race.
Looks great with the Ferrari red and the black deck hardwear.
Like the style of bow rail :sifone:

Who's going up with the camera on the office roof??

Great job from you and your guys!!!


//Mange

[bigboat28]

Looking good

[Wildthing2u]

Jo
Boat is looking great...
Tell the family we said hello

[Shawn]

Lookin' great as usual, Jo. They just keep getting better!

[POWERPLAY33]

This thing is gonna be bad ass!

[38fountainSC]

Boat looks good, any updates on the pleasure version?

[JO - PANTERABOAT]

Here are a few pics. of the new Pantera race 41'. We sprayed the windscreen area in flat black so it would match the custom black deck hardware. The race dash will be going on tomorrow since it is being upholstered in yellow vinyl with padding matching the custom 2 man race bolster. New dash looks real nice ! I will post a few more pics. soon showing the race cockpit.

Split engine hatches are being sprayed Red this Saturday. Look real custom with the new air intakes we just put in this week.

Race # 08 will also be going on plus Pantera logo and sponsors.

Boat was sprayed with Ferrari Red.

JO

[JO - PANTERABOAT]

The pleasure 41' is also being worked on. I will post pictures of it next week for you guys to see. Looking real nice !!:)

Here is a sneek peak.:driving:

JO

[JAIME]

dam Pantera!!! that is bad azz! cant wait to see you out there racing.

[cosmic12]

Looking great!, What is the black bench looking thing?

[Bobcat]

Looking great!, What is the black bench looking thing?

Cleat

[rchevelle71]

Looking great!, What is the black bench looking thing?

Picnic table:sifone:

Great Job guys, one of these days I need to stop working so hard, take a break and come down to visit.

[lowblue320]

Here are a few pics. of the new Pantera race 41'. We sprayed the windscreen area in flat black so it would match the custom black deck hardware. The race dash will be going on tomorrow since it is being upholstered in yellow vinyl with padding matching the custom 2 man race bolster. New dash looks real nice ! I will post a few more pics. soon showing the race cockpit.

Split engine hatches are being sprayed Red this Saturday. Look real custom with the new air intakes we just put in this week.

Race # 08 will also be going on plus Pantera logo and sponsors.

Boat was sprayed with Ferrari Red.

JO





Again real nice, I keep telling myself to go by but can't make the time...I really need to check this boat out...

[searaycer]

awesome.....

[Ironmanwb]

Very nice ....Keep the pics coming. Any idea on speed w/ 525's or 700's?

[Wylie-Rat]

Congrats Pantera - Both of the 41's are looking SWEET and both are BAD AZZ...

[Jassman]

looks awesome...Team PANTERA.. it maintains that good looking offshore look even down to the old school cleats. Im anxious to see a few pleasure versions. :sifone:

[Mikeb4]

Boat was sprayed with Ferrari Red.

JO

Real sharp Jo ...... very sharp ..... it will remind some industry folks of the great work you do! :cheers2:

[J-Bonz]

Boat looks great!!! It reminds me of Clifford..... :)

[DAREDEVIL]

I guess i need to come down and check it out soon !!!!!:cheers2:

AWSOME !!!!!!:seeya:

[Jassman]

dash looks real good. no flat panels..

[Roger 1]

Updates??

[bigboat28]

Yea, any new pics?

[JO - PANTERABOAT]

We are rigging both 41'. I will post more pictures in a couple of days. Here is the custom split engine hatches on the race 41'. Dual intake naca ducts will be sprayed flat black. Custom back seat is for the pleasure 41'.

JO

[DollaBill]

very nice Jo

[Dude! Sweet!]

Very nice!

[Dude! Sweet!]

And a DollaBill drop in to the La Familia Pantera. Word. :sifone:

[JO - PANTERABOAT]

Thanks. I will post more pics. soon. Custom 2 man race bolster is being completed now yellow in color.

JO

[Buoy]

I can't wait to see the completion of both boats!!
And looking forward to hearing the performance.
Everything is looking great!

[rchevelle71]

Great job guys!!!

[MANITIE]

Jo...what a great looking boat....like always....

I don't think it will be long before you see the 41 racing here in the US.

Thanks for taking the time posting pics..can't wait to see her run....