Mirage props solid hub / Rubber

[kzcollectr]

I have a set of 21p Mirages for my Formula but one had been replaced with a solid hub. Is there an issue running 1 rubber hub and 1 solid hub as long as they are matching RH/LH props ?

[MOBILEMERCMAN]

The operation won't matter. Some drives prefer the rubber hubs. Alphas must use rubber. Personally I suggest rubber hubs [non solid] on pleasure boats. The drives will appreciate it.


Oh, Welcome to the site

[jeffswav]

According to Merc the rubber hubs will only work for 450HP or less. I have run a solid hub for the last several years.

[kzcollectr]

Mine are 330hp smallblock vortecs w/ alphas.

[MOBILEMERCMAN]

No if, ands, or buts. No solid hubs. Older props are rubber. The newer use the plastic torque flow hub.

[MarylandMark]

+1 on the welcome to SOS!!

Question answered- no solids!

[Coolerman]

I have a set of 21p Mirages for my Formula but one had been replaced with a solid hub. Is there an issue running 1 rubber hub and 1 solid hub as long as they are matching RH/LH props ?

Welcome to the site. Just fyi, MarylandMark is SOS's resident expert about being an expert. :smash::cheers2: Just busting ya Mark :sifone:

[HiZ]

Unless you are over 400hp go with the plastic inserts
The Alpha Drives will love it, so will the props if you have an impact