72C Borg Warner 9 disks?

[Sick Sting]

How can i do this or how is it possable machining special gears/parts?
Thanks
Mike

[glassdave]

not sure about the tech stuff but i believe you have to get rid of some reverse disks or something like that.

[Sick Sting]

Thanks for the input dave anyhtign is better then nothing.
-Mike

[bor]

Hi Mike ,

I heared a friend of mine here talking about even 12 discs is possible but you need to do some machining.

[MikeyFIN]

I beileve a 32 Aerotek I know of has the 12 plate tranny...
Not a tough job to do if you got a lathe.

[Ratickle]

9 disc is pretty easy from everything I've read or those I've talked to. 11 and 12 disc is a lot tougher with machining involved.

I believe any trans shop can do the 9 swap.

How much horsepower and weight are behind the trans? I puked 2 of the 9 disc before I had Huber do mine right. 12,000 lbs, 630hp twins in the 39 Scorpion.

[MILD THUNDER]

The huber 1200 series have 9 disc. Good for 1200FT lbs they say.

http://www.hubermarine.com/performance.html

[Ratickle]

The huber 1200 series have 9 disc. Good for 1200FT lbs they say.

http://www.hubermarine.com/performance.html

I know. And they are from what I've heard.

I was saying I had mine modified locally to the 9 disc and they puked twice. I now run the Huber 1450's, no problems.....

[DAREDEVIL]

Mine is a 8 plate BW , but with the bronze plates and i did not have an issue yet in racing with 750-800 HP and 700 + fpt !!!

But i also have a light boat.

[runninhotracing]

Mine is a 8 plate BW , but with the bronze plates and i did not have an issue yet in racing with 750-800 HP and 700 + fpt !!!

But i also have a light boat.

Hey BIG Daddy there lookin for you over at whats left of a site they call OS@ ,Merry Xmas & Happy Holidays and give Heather a BIG smoooooch :kiss:



ROCK ON SERIOUS !!!!!!!!!!!!!!!!!!!!:cheers2:
ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!
DREYDEN PERFORMANCE MARINE 302-367-4962